Restart everything including PC ...It sounding like nand is fubar It has happened to me 3 times shortly after RGH
Help!!!!System works after rgh, but now want turn on, just beeps!!!!
- Thread starter bware
- Start date
Didn't do that. Is there anyway to read nand again, because the computer is not detecting my sd card adapter now. It was saying format at first.
I didn't select XEbuild retail when writing original nand. What can I do to rewrite nand, because PC won't detect sd card now.
The posted log you showed us is showing you did it correctly nanddumpbin1
Writing to E:\ from C:\Users\bware\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Done
Did you see the status bar functioning during the write process
Writing to E:\ from C:\Users\bware\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Done
Did you see the status bar functioning during the write process
Last edited:
You did not do anything wrong!!! I have purchased consoles that have the exact symptoms you are describing complete flat line
The only cure is 2 convert to 16-M/B nand
The only cure is 2 convert to 16-M/B nand
Yeah the status bar did progress. I didn't select retail in the xebuild tab like someone stated though and now I can't read the nand at all with the 4gb read/write adapter. Is it a way to correct this or is the console done, because someone said sounds like my nand is gone. Is it a way to replace or repair the nand without basically buying another console?
What ever is in the source buffer is what you wrote to the machine... pretty sure your OK there
Or like what gavin said you could re-write the ECC and you should at least get green light in RF> when trying to start
Nand conversion is not easy without expensive Equipment and good micro solder skills hardly worth it for you
Or like what gavin said you could re-write the ECC and you should at least get green light in RF> when trying to start
Nand conversion is not easy without expensive Equipment and good micro solder skills hardly worth it for you
Last edited:
Is there a tut on how to convert to 16 mb nand? Wonder if a nand x or jr programmer will read the nand? This 4gb read/write adapter isn't working anymore.
no other reader will work only sound card reader .. Like I said its a processes to convert the nand to 16-M/B
The reader is ok that console flat lined
The reader is ok that console flat lined
Last edited:
Holla at me if you know someone who I can send this to and get it repaired. I'm frustrated right now.
There are some guys like no felonies that can repair that thing including one of admins of this site
I have done that repair 5 times But I just trade out the console when approaching this corruption problem
Then I just fix it for myself later That way I don't feal bad when I spend 5 or more hours on a console that has a $70 value
I have done that repair 5 times But I just trade out the console when approaching this corruption problem
Then I just fix it for myself later That way I don't feal bad when I spend 5 or more hours on a console that has a $70 value
How much and will the flashed drive still play backups when repaired. And is there some sort of guarantee or warranty.
john mathews
VIP Member
jsinger47
Troll Eating Dogs
Before you send it out, try reading the Nand without the rf board connected. Sometimes they die and cause the no power issue.
If you can read without it connected, I'd imagine you'd just need to replace that.
If you can read without it connected, I'd imagine you'd just need to replace that.
nofeloniesyet
VIP Member
jsinger is def the man to send these things to.hes gotten real familiar with em over the last few months and has the needed sh*t on hand.and he does em pretty damned cheap too.
Last edited: