HELP: Updating LT 1.9 to 2.0 quick question

S

sim0n

Full Member
Dec 5, 2003
35
0
I've got the LiteOn 74850c that I flashed with LT 1.9 a few months ago. I used the post 13141 FW to update it btw.

That said, I lost all my .bin's and stuff from when I did it so I'm left with nothing and want to update to the LT+ 2.0 FW tonight.

I'm assuming the correct FW to use in the new JungleFlasher 1.88 is "LTPlus-025-v2.0.bin"?

Question is- Can I just plug the DVD up to the PC, fire up JungleFlasher, create a dummy.bin, Erase, then select the new "LTPlus-025-v2.0.bin" and Write or do I have to extract the key with CK3 and stuff all over again?
 
Farly

Farly

VIP Member
Nov 10, 2003
1,147
0
Scotland
You'll need to redump the drive, use the dummy.bin from that and spoof it into the LTPlus-025-v2.0.bin and save your CFW. Then erase the drive and write the new firmware :)
 
S

sim0n

Full Member
Dec 5, 2003
35
0
crap, my bootleg ck3 lite motherboard piece burnt out so I can't power on my drive. Where can i get another (reputable dealer in US pref). Or is there another way I can power on the drive w.out it?
 
S

sim0n

Full Member
Dec 5, 2003
35
0
Crap... another issue.

Since I didn't have a working connectivity unit, I powered my drive up using the 360 brick and jungle flasher read it fine. I chose my dummy.bin (that I found), spoofed to drive, the did lite on erase. powered xbox off/on, and it didn't read properly. So I tried again, now when I turn on the xbox the front green light just blinks fast and Jungle Flasher will not read the drive anymore. How can I fix this?
 
You must log in or register to reply here.