RGH help wiat rgh (all new to this!)

[stefff]

hello m8's..

iam all new to reset glitch hack, bouth i like that it's possible to run back-ups from usb hdd and change the dash board wiat freestyle dash and so on.. and i was all ready wiat dash 14699.. until yesterday when the rgh2.0 come out..

my english isent so good both for duing a rgh 2.0 i still need:

1 coolrunner
1 nand-x v3.0
1 nand-x to coolrunner update cable
1 set of qsb's for better timing?

right?
or is the nand qsb now useless becouse of the new wirering?

and is there coming a new coolrunner v2? or should i just follow the guide on tx frontpage there tells me to remove a fuse and solder the wirer new way on the pictures ?
____________________

can i use the program called j-runner still to make this rgh, or do i need a new program? or do i need to paste som new files in to a folder for a program?
_____________________

can i wirer it all up to start wiat ( coolrunner wiat all 7 cabels and then connect it to the nand-x v3 or do i need to solder the wires from the nand-x v3 to the motherboard to read the nand first? )

i know that it was alot of questions both i couldnt find a picture tut to help me

//stefff

 

[sick360mods]

They are working on a coolrunners v2 so u can either wait for that or use the coolrunners rev a or b with the changes needed. If your on dash 14699 then u don't need the coolrunners v2.

Wire the nand x first and read the band using j runner as its the easiest and best GUI out.

The qsb aren't needed but does make things easier for noobs

Sent from my PC36100 using Tapatalk 2

 

[AMIT]

hello m8's..

iam all new to reset glitch hack, bouth i like that it's possible to run back-ups from usb hdd and change the dash board wiat freestyle dash and so on.. and i was all ready wiat dash 14699.. until yesterday when the rgh2.0 come out..

my english isent so good both for duing a rgh 2.0 i still need:

1 coolrunner
1 nand-x v3.0
1 nand-x to coolrunner update cable
1 set of qsb's for better timing?

right?
or is the nand qsb now useless becouse of the new wirering?

and is there coming a new coolrunner v2? or should i just follow the guide on tx frontpage there tells me to remove a fuse and solder the wirer new way on the pictures ?
____________________

can i use the program called j-runner still to make this rgh, or do i need a new program? or do i need to paste som new files in to a folder for a program?
_____________________

can i wirer it all up to start wiat ( coolrunner wiat all 7 cabels and then connect it to the nand-x v3 or do i need to solder the wires from the nand-x v3 to the motherboard to read the nand first? )

i know that it was alot of questions both i couldnt find a picture tut to help me

//stefff

If i understand you correctly (but it's hard to understand ,LOL) .

You have a Slim Console with 14699 Dash
and you want to play back up from USB or HDD !

Answers and please excuse me if i'm wrong !

yes you can RGH your slim if you have trinity motherboard

yes your equipment is right !

and all QSBs are not for better boot time
QSB=Quick Solder Board !
oly POST QSBs can help you for better boot times if you having longer boot times using the normal method !

RGH 2.0 is only for Phats with 14717,14719 Dash !
Slim don't need RGH 2.0

yes you can use J-runner no need to copy\paste anything!(just update the app if any update available)

Here is two tuts 1. Xecuter CoolRunner - Slim Install (QSB) 2. Xecuter CoolRunner - Slim Install (Wires) !

Hope this help and sorry if i miss-understand you !

 

[stefff]

oka, iam all new to the rgh, i have flashed a lot of xboxes to 3.0.. so iam not new to xbox ..

it's some time since i have used one of my xboxes, it's on lt 2.0 so iam not close at 14699, so it would be easy to make that dash upate !...

what chances do i need?. if i look at this post: http://team-xecuter.com/forums/showthread.php?t=74857

its for dashboard 14699 and there are no changes on the coolrunner rev b or wirering, so what's good does it to remove the fuse and change the wirering? if i stay on 14699 - isent the fuse removing and wirering change for if i want a dashboard higter than 14699?

sorry for the newb questions both i just want to be 100% sure before i begin

---------- Post added at 20:01 ---------- Previous post was at 19:53 ----------

If i understand you correctly (but it's hard to understand ,LOL) .

You have a Slim Console with 14699 Dash
and you want to play back up from USB or HDD !

Answers and please excuse me if i'm wrong !

yes you can RGH your slim if you have trinity motherboard

yes your equipment is right !

and all QSBs are not for better boot time
QSB=Quick Solder Board !
oly POST QSBs can help you for better boot times if you having longer boot times using the normal method !

RGH 2.0 is only for Phats with 14717,14719 Dash !
Slim don't need RGH 2.0

yes you can use J-runner no need to copy\paste anything!(just update the app if any update available)

Here is two tuts 1. Xecuter CoolRunner - Slim Install (QSB) 2. Xecuter CoolRunner - Slim Install (Wires) !

Hope this help and sorry if i miss-understand you !

iam sorry i didnt say that i have a bounch of phat ones .

all under 14699.

yes i want to play backup from a external hdd.

- if i rgh does the game still want to update the dash if there is a newer dash on the game than on my xbox?

and oka rgh2.0 for dash over 14699 - both still dosent the game want to upgrade the dashboard if it is a newer game or in the feture? and then we need to upgrade the old coolrunner rev a/b to a coolrunner v2? to get a newer dash

 

[AMIT]

oka, iam all new to the rgh, i have flashed a lot of xboxes to 3.0.. so iam not new to xbox ..

it's some time since i have used one of my xboxes, it's on lt 2.0 so iam not close at 14699, so it would be easy to make that dash upate !...

what chances do i need?. if i look at this post: http://team-xecuter.com/forums/showthread.php?t=74857

its for dashboard 14699 and there are no changes on the coolrunner rev b or wirering, so what's good does it to remove the fuse and change the wirering? if i stay on 14699 - isent the fuse removing and wirering change for if i want a dashboard higter than 14699?

sorry for the newb questions both i just want to be 100% sure before i begin

iam sorry i didnt say that i have a bounch of phat ones .

all under 14699.

yes i want to play backup from a external hdd.

- if i rgh does the game still want to update the dash if there is a newer dash on the game than on my xbox?

and oka rgh2.0 for dash over 14699 - both still dosent the game want to upgrade the dashboard if it is a newer game or in the feture? and then we need to upgrade the old coolrunner rev a/b to a coolrunner v2? to get a newer dash

Which Dash you're on please stay on that ,don't update !
yes if you have Phat Console with 14699 or lower dash then the wiring be same !

i told you before RGH 2.0 is Only For Phat consoles with 14717 ,1719 seems like you don't want to understand what i told !

Requirements !

1. NAND-X (with v3 code)
2. NAND-X to CoolRunner JTAG Cable
3. TX CoolRunner
4. soldering iron+Some good soldering experience !
5. Solder
6. Flux

EDIT:....................................................................

Yes ,games still need an update to play !
once you got your console glitched no need to re-program coolrunner or buy a new glitch chip again !
just use J-runner to build a Glitch image to new dash and write it to your nand !
same process repeat when any new update comes out !

hope this helps !

 

[stefff]

Which Dash you're on please stay on that ,don't update !
yes if you have Phat Console with 14699 or lower dash then the wiring be same !

i told you before RGH 2.0 is Only For Phat consoles with 14717 ,1719 seems like you don't want to understand what i told !

Requirements !

1. NAND-X (with v3 code)
2. NAND-X to CoolRunner JTAG Cable
3. TX CoolRunner
4. soldering iron+Some good soldering experience !
5. Solder
6. Flux

hope this helps !

iam sorry as i said my english isent good (iam from a non english speaking country)

both just to be sure you say:
"
yes if you have Phat Console with 14699 or lower dash then the wiring be same !

"

wiring like the guide i linked to?

and if it's better to stay lover than 14699, does that mean that the game (from my hdd) won't try to update the dashboard eaven if it's bf3 or another new game

 

[AMIT]

iam sorry as i said my english isent good (iam from a non english speaking country)

both just to be sure you say:
"
yes if you have Phat Console with 14699 or lower dash then the wiring be same !

"

wiring like the guide i linked to?

and if it's better to stay lover than 14699, does that mean that the game (from my hdd) won't try to update the dashboard eaven if it's bf3 or another new game

i'm also from a non english speaking country (my country's national language is Hindi)!

if any game require any higher dash to run then they will throw eroor like "need higher dash to play or like this" ,the if you wish then you need build new glitch image using J-runner or any other Apps !

The game itself can't ran the update unless if they run from DVD drive (if dash launch is installed in your console then it's almost impossible to update your console automatically or by a game disc) !

 

[stefff]

Which Dash you're on please stay on that ,don't update !
yes if you have Phat Console with 14699 or lower dash then the wiring be same !

i told you before RGH 2.0 is Only For Phat consoles with 14717 ,1719 seems like you don't want to understand what i told !

Requirements !

1. NAND-X (with v3 code)
2. NAND-X to CoolRunner JTAG Cable
3. TX CoolRunner
4. soldering iron+Some good soldering experience !
5. Solder
6. Flux

EDIT:....................................................................

Yes ,games still need an update to play !
once you got your console glitched no need to re-program coolrunner or buy a new glitch chip again !
just use J-runner to build a Glitch image to new dash and write it to your nand !
same process repeat when any new update comes out !

hope this helps !

okay so just to be sure, iam understanding you the right way (iam really trying to understand so please give me a chance, iam from a non english speaking country.)

the pictures on tx frontpage is just to make a coolrunner rev a/b to a coolrunner v2?

becouse iam under dash v. 14699 i can buy a conrunner rev b and connect it as a conrunner rev b like this tut: http://www.ixtreme.net/jtag-hack/20078-reset-glitch-hack-guide-using-tx-coolrunner.html ( all tx hardware! -rgh )

wiat out removing fuse and change the wiring for future glitch image writing to the nand ?

so as a newbie like me it would be best to use the QSB wiat cable plugs for future glitch writing to the nand with dashboard update ?

btw how do i make a glitch image for future updates in j-runner ?

have in mind this is the 1st time i try to make a rgh and i would like it to work wiat out breaking/brick or anything else bad to the console

//stefff

 

[AMIT]

okay so just to be sure, iam understanding you the right way (iam really trying to understand so please give me a chance, iam from a non english speaking country.)

the pictures on tx frontpage is just to make a coolrunner rev a/b to a coolrunner v2?

becouse iam under dash v. 14699 i can buy a conrunner rev b and connect it as a conrunner rev b like this tut: http://www.ixtreme.net/jtag-hack/20078-reset-glitch-hack-guide-using-tx-coolrunner.html ( all tx hardware! -rgh )

wiat out removing fuse and change the wiring for future glitch image writing to the nand ?

so as a newbie like me it would be best to use the QSB wiat cable plugs for future glitch writing to the nand with dashboard update ?

btw how do i make a glitch image for future updates in j-runner ?

have in mind this is the 1st time i try to make a rgh and i would like it to work wiat out breaking/brick or anything else bad to the console

//stefff

Just read those guides very carefully !
all of your answer are there !

you just need your nand dump from your console and your console's CPU Key to create a Glitch Image !

try to read the guide care fully if you have problems then just use this to translate it !

see this to get a idea about RGH and how the J-runner works !