help with falcon rgh2

chase

chase

VIP Member
Apr 11, 2004
1,073
28
Toronto, Canada
weiserbud2020 said:
when i read nands with jrunner its selecting r-jtag and not glitch2 do i just put it on glitch2 and cr4 as i put it on glitch2 and gone through the dips from http://team-xecuter.com/forums/show...PHAT-Opus-Falcon-Jasper-Install-Guide-(RGH2-) i done them on 0hm and on 10ohm i only got to do the 100 now but its not glitched and any up to now and not had xell up to get the cpu key
Click to expand...
waiting on the pictures and J-runner log but yeah, you'd pick glitch2 and CR4 options.. if install is good (used all recommended points), then you'd have 16(dip settings) X 3(postbit resistance settings) to play around with to see which one works :)

also, post rater output if possible
 
Last edited:
W

weiserbud2020

Full Member
Mar 24, 2015
48
0
hi sorry i keep forgeting to but put pic up here is the j-runner log the green wire is the white wire i had to extend it as i didnt have any long wires for it

13 April 2015 17:32:12

J-Runner v0.3 Beta (7) Started



Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 5774
Falcon/Opus
Version: 10
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 5774
Falcon/Opus
Reading Nand to C:\Users\mark\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Reading Nand
Done!
in 3:23 min:sec

Reading Nand to C:\Users\mark\Desktop\J-Runner v3 (5) Core Pack\J-Runner v3 (5) Core Pack\output\nanddump2.bin
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:23 min:sec

Comparing...
Nands are the same
Glitch2 Selected
CR4 Selected
Falcon Manually Selected
ECC created
Version: 10
Flash Config: 0x01198010
Writing Nand
image_00000000.ecc
Done!
in 0:18 min:sec

black.jpgblue.jpgchip.jpggreen.jpgred2.jpg
 
Last edited:
Orangeprofessor

Orangeprofessor

VIP Member
Oct 27, 2013
171
23
The Third Dimension
Do you get a debug light? Also, check the continuity between FT6U7 and FT6U6, your pic looks kinda weird.....
 
Last edited:
chase

chase

VIP Member
Apr 11, 2004
1,073
28
Toronto, Canada
remove the rater screenshots as they are irrelevant since it doesn't show any rater output

more importantly, why do you have a green wire soldered to cpu_rst on the 360 and a white wire soldered to "G" pad (cpu_rst) on the CR4 ??
 
W

weiserbud2020

Full Member
Mar 24, 2015
48
0
the white and green wire is the same wire i just had to make the white wire longer and i didnt have any more wire left to i joined the green wire to the white wire so its the same wire so the white and green wire are the same 1 heres a another rater post picMy Rater Screenshot4.pngMy Rater Screenshot5.png
 
Last edited:
W

weiserbud2020

Full Member
Mar 24, 2015
48
0
no i dont get and debug light/green and the wire on the FT6U7 is on the FT6U7 point the pic looks like that as i took pic with my phone
 
chase

chase

VIP Member
Apr 11, 2004
1,073
28
Toronto, Canada
your soldering could be a bit neater and some flux wouldn't hurt

you don't have a long piece of wire to use .. not a fan of joining wire together .. especially for the cpu_rst

do you have a jr-programmer as it is needed for rater .. what you have is not rater.. rater screen is just showing j-runner log cuz it is open

have you tried R-JTAG+ ?
 
Orangeprofessor

Orangeprofessor

VIP Member
Oct 27, 2013
171
23
The Third Dimension
chase said:
your soldering could be a bit neater and some flux wouldn't hurt

you don't have a long piece of wire to use .. not a fan of joining wire together .. especially for the cpu_rst

do you have a jr-programmer as it is needed for rater .. what you have is not rater.. rater screen is just showing j-runner log cuz it is open

have you tried R-JTAG+ ?
Click to expand...
Chase is right, get some flux and touch some of your points up, especially the post_out. Plus you should check your NAND wires since J-runner is giving some R/W troubles.

EDIT: Also, I tried to do a falcon rgh2+ install and it was very problematic, try doing a RJTAG+ install.
 
Last edited:
W

weiserbud2020

Full Member
Mar 24, 2015
48
0
yes im using jr-programmer v2 and no i not tryed r-jtag as i dont know where the 2 extra wires go on the board as i never done a r-jtag before but i look around to see where the other 2 wires go
 
W

weiserbud2020

Full Member
Mar 24, 2015
48
0
i checked my nands wires and thay look ok and i can r/w my orig nand back to the xbox 360 and its works every time with np at all
 
Orangeprofessor

Orangeprofessor

VIP Member
Oct 27, 2013
171
23
The Third Dimension
  • Like
Reactions: weiserbud2020
Orangeprofessor

Orangeprofessor

VIP Member
Oct 27, 2013
171
23
The Third Dimension
weiserbud2020 said:
no not got any QSBs at the moment but im going to start getting some as they look a lot easier to do but ty
Click to expand...
tbh you only need the jtag qsb. Just be careful with the stby_clck.
 
W

weiserbud2020

Full Member
Mar 24, 2015
48
0
i done all the r-jtag wires and when i writing the xell on to xbox i get 3 rlod but when i put the orig nand to it it runs ok again so what im i doing wrong here are some pics of the wiring the green wire on the cpu is the same wire as the white thats on the m on the cr4
black.jpgblue.jpgchip.jpgclamp.jpgcpu.jpgearth.jpgloop.jpgred.jpgr-jtag.jpg
 
Last edited:
W

weiserbud2020

Full Member
Mar 24, 2015
48
0
ok ty i go to shop tomorrow as i got some 100 and 10k resistors but not any 470 ones and does it go anyway or a particular way
 
Last edited:
You must log in or register to reply here.