help with falcon rgh2

[Orangeprofessor]

Where is your stby_clck picture?

 

[jligg]

Where is your stby_clck picture?

Second to last picture in his post

 

[Orangeprofessor]

Second to last picture in his post

The image looks cutoff, but at least there is electrical tape.

 

[weiserbud2020]

i put a 470 reister on 4to7 but it still not booting xell up
Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 5774
Falcon/Opus
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Aud_Clamp Selected
R-Jtag Selected
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully falcon_hack_aud_clamp.bin
Version: 10
Flash Config: 0x01198010
Writing Nand
falcon_hack_aud_clamp.bin
Done!
in 0:18 min:sec

 

[Orangeprofessor]

i put a 470 reister on 4to7 but it still not booting xell up
Checking Files
Finished Checking Files
Checking Console..
Version: 10
Flash Config: 0x01198010
01198010
Xenon, Zephyr, Opus, Falcon
CB Version: 5774
Falcon/Opus
Initializing nanddump1.bin..
Falcon/Opus
Jtag Selected
Nand Initialization Finished
Aud_Clamp Selected
R-Jtag Selected
Patching Jasper version 2.3 SMC at offset 0x12BA
XeLL file created Successfully falcon_hack_aud_clamp.bin
Version: 10
Flash Config: 0x01198010
Writing Nand
falcon_hack_aud_clamp.bin
Done!
in 0:18 min:sec

I'm assuming you still don't have a debug light?

Also, I believe that earlier in the thread, you said you had a JR programmer v2. I may be wrong on this but I think the POST logs can give us an idea what's giving you some trouble.

 

[weiserbud2020]

hi yes im using JR programmer v2 and no im not getting debug light im going to try to get the post rater working if i can ive done all the 1 dip setting and 2dips settings on all 3 jumpers but still no luck im getting Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 41 - VERIFY_OFFSET
Post 41 - VERIFY_OFFSET
TIMEOUT or SMC CORRUPTED - Shutting Down
or sometimes i just get post 1 or post 4
Post 4F - VERIFY_OFFSET_6BL_CF
Post 4F - VERIFY_OFFSET_6BL_CF

 

[Orangeprofessor]

hi yes im using JR programmer v2 and no im not getting debug light im going to try to get the post rater working if i can ive done all the 1 dip setting and 2dips settings on all 3 jumpers but still no luck im getting Phat Selected
Version: 10
Power Up
Waiting for POST to change
Post 41 - VERIFY_OFFSET
Post 41 - VERIFY_OFFSET
TIMEOUT or SMC CORRUPTED - Shutting Down
or sometimes i just get post 1 or post 4
Post 4F - VERIFY_OFFSET_6BL_CF
Post 4F - VERIFY_OFFSET_6BL_CF

From your earlier pic, your JTAG wiring is incorrect. I took your pic and edited a little bit.

 

[weiserbud2020]

hi i have put a 470 resister on 4 to 7 and i got a diode on the bottom here are the pics

 

[Orangeprofessor]

hi i have put a 470 resister on 4 to 7 and i got a diode on the bottom here are the picsView attachment 32001View attachment 32002

It looks like on the back of the mobo, you have that diode soldered to the back of the nand area. Relocate it to the JTAG area.

 

[weiserbud2020]

ty for that i didnt realise i put it on the rtag area now i do some more dip settings later and see if i can get xell to boot ty again:facepalm:

 

[Orangeprofessor]

The console still boots retail, right?

 

[weiserbud2020]

yes if i but the orig nand back on it boots ok

 

[weiserbud2020]

still no joy getting xell to boot

 

[jligg]

Where you located? if in the states I can get this fixed up for you.

 

[weiserbud2020]

no i live in uk but ty and i phoned the person im doing it for to tell him its been a pain and he said it worked on on is other xbox so im just didnt think it would work if it been took out of a other xbox or can you use the same cr4 in another abox

 

[jligg]

Np

 

[Oggy]

Why does your cpu_rst wire look green on mobo side and blue on CR side?

Also, have you actually written an image fine rather than a corrupt one? I can fix this, if you want, but Im only free to do it this coming week.

 

[jligg]

Best off letting oggy get ya sorted before its to late and ya end up damaging it. He does good work

 

[weiserbud2020]

the green wire is the white wire thats on the m on the cr4 as i had to make the wire longer as i didnt of any more long green wire and the blue wire is on the c on the cr4 and on the FT6U1 if i do it with the aud clamp unticked i got all the 4 green lights on and the flashing middle green light

 

[Oggy]

I havent seen a verified write yet, or im tripping from 3 litres of cough medicine.