Help with FRAG after failed Bios Flash....

[Pillar]

I have x2.6 chip, installed on a v1.0 xbox. I had the FlashBIOS 3.0.1 Bios screen show up on bank one, aswell as FlashBIOS 3.0.3 on bank2. So i have it on bank1 and tried to flash it with my DVD-R 512k BIOS, using XB2BM, Xecuter2_4976_MultiVer_256k.bin that i created. It wouldnt load, so i took out the disk and than the xbox shut off, i powered up the xbox, with it powering and powering off 3 times, with FRAG, i still get the FlashBIOS 3.0.3 screen when swithced to bank 2 (I also had a thought incase the chip needs to be reprogramed to get bank 1 FlashBIOS 3.0.1 back, I have an additional x2.6 here, can I just open the xbox back up and swith them?)

Thank for any help and advice that is given, really apreciated.

 

[Fantmx]

Go to Xbins and download 5035. Use the proper version for your box (it will say vOld in the filename). Flip to bank 2, and flash. Before you ask look at the flashbios tip in my sig.

 

[AngelosDracul]

Yeah, and you NEED to make sure that the bios you're flashing with is 512K. You can't flash with a 256. That's why it fragged in the first place... correct me if I'm wrong, Fantmx.

 

[MKChampion]

X2 5035 already comes as a 512k file so you can flash it no problem