Help with hacking a xenon mobo with 16203 dash

[snoorkalb]

Hello there,

My excuses if this is a repost .(Noob in xbox mod scene, not a noob in modding)
Can anyone help me with this dillema.
I have an old Xbox 360 with a xenon mobo and a 16203 dashboard.
I want to hack it too let it run some emulators and homebrew.
After some research i only find some answers fron the year 2011-2013 and with no conclusive answer.
TLDR:
Is it possible to use RGH or R-JTAG or any other methods to run homebrew.

Thanks for the help kind modders!

 

[john mathews]

no, but u can get cpu/dvd key , even with this it could kill the console , there not worth it , get yourself a slim

 

[gavin_darkglide]

no, but u can get cpu/dvd key , even with this it could kill the console , there not worth it , get yourself a slim

That statement is kinda true. There have been successful boots of a xenon split cb console using r-jtop, and rgh 1.2. Neither are supported here though, but essentially if you can find a cr rev c, and are patient, then one of those options might work. Xenons are iffy on coming back after the cpu slowdown, and only certain revisions of the xenon processor will work. Lucky for you, a genuine coolrunner rev c shouldnt cost you more than $20 and thar is the high side.

 

[nofeloniesyet]

That statement is kinda true. There have been successful boots of a xenon split cb console using r-jtop, and rgh 1.2. Neither are supported here though, but essentially if you can find a cr rev c, and are patient, then one of those options might work. Xenons are iffy on coming back after the cpu slowdown, and only certain revisions of the xenon processor will work. Lucky for you, a genuine coolrunner rev c shouldnt cost you more than $20 and thar is the high side.

theres the ttl version 15432 made that works for key retreival on all xenons and zephyrs,but again only good for keys.