Hi all looking for some help with fat liton drive that I was flashing and the usb pro stopped working when was wipping the drive ,I got dummy bin stored but now it only play dvds how do I reflash it as just unlock it as it froze thanks for eny help . 74850c
LITEON 74850 help with liton 74850c
- Thread starter besty
- Start date
- Jun 4, 2010
- 3,080
- 0
After unlocked the drive and loaded the dummy bin and firmware then loaded that and pluged the drive in xbox it would only play dvds so some think gone wronge thanks
- Jun 4, 2010
- 3,080
- 0
Assuming you're on the latest dash! Under the firmware Tool 32 Tab Load your dummy.bin as the source and 0251 LT3.0 as target firmware, spoof the source to target.
Next go to the MTK Flash 32 tab and press the Lite-on erase. Power cycle after which the drive should get into vendor mode. Press write, when done use the outro reset button and you should be done. Report back with the result.
Next go to the MTK Flash 32 tab and press the Lite-on erase. Power cycle after which the drive should get into vendor mode. Press write, when done use the outro reset button and you should be done. Report back with the result.
Not sure what dash it on as lad was using it on live when i got it but it was not flasheded .
---------- Post added at 00:16 ---------- Previous post was at 00:12 ----------
And have try half open when doing this thanks .
---------- Post added at 00:16 ---------- Previous post was at 00:12 ----------
And have try half open when doing this thanks .
- Jun 4, 2010
- 3,080
- 0
If he was playing on live recently then he must be on the latest dash (14719). And you don't heed to have the tray open or any of that stuff.
Hi just tryed doing what you said no it saying no drive and status ox80 what to do next thanks .
---------- Post added at 01:23 ---------- Previous post was at 01:16 ----------
Hi just got drive to show up but it saying there no key found Target is LT - ID strings not copied to Target ,Target rev is LT 02510C, serial info not copied
---------- Post added at 01:23 ---------- Previous post was at 01:16 ----------
Hi just got drive to show up but it saying there no key found Target is LT - ID strings not copied to Target ,Target rev is LT 02510C, serial info not copied
BL4K3Y
VIP Member
That's fine, just make sure you click Spoof Source to Target and check that the drive key matches, from there you can click Write and once you see Write Verified, connect the drive back to your console and test 
!
!
Last edited:
Hi getting invalid status ox50 now
---------- Post added at 01:59 ---------- Previous post was at 01:56 ----------
On drive properties it saying no dvd found
---------- Post added at 01:59 ---------- Previous post was at 01:56 ----------
On drive properties it saying no dvd found
BL4K3Y
VIP Member
Make sure you are performing Lite-On erase on the correct port (port 0x0000 - tick USB only).
Which CK3 do you have?
Which CK3 do you have?
Last edited:
hersheys247
VIP Member
Based on this answer i assume ur not using anything but xbox to power drive, please correct me if im wrong, but if u are then ur just asking for trouble
Suggest getting proper power such as ck3 mini or ck3i which i recommend , noob friendly, all automatic, load everthing, hit liteon erase, hit write, hit outro. It does everything else for u
If i helped you in anyway, please press the THANKS and REP button
Sent from my brain tumor causing device using Tapatalk
v0rtex
Full Member
Yes got it sorted with all the help now on to next one ,rgh that works but dvd drive only plays films but can use hard drive for xbox games .