i have jasper 512 when flashed to original it give me error 0022 (30 sec) when flashed to hacked (14719)it give me error 0002
help with strange error
- Thread starter nolimit5005
- Start date
Martin C
VIP Member
first time it was working when i tried to flash with usb stick the system shutdown automatic and the power supply give me red led(during flashing i didn't use fan) but now no xell at all when i tried flash the original it give rrod 0022 i tried to flash the hacked image through LPT it give me 0002 error
last time they told me i have to reflow the CPU or GPU because i have done everything possible
sorry for my bad english
last time they told me i have to reflow the CPU or GPU because i have done everything possible
sorry for my bad english
this dame console will drive me crazy
now i am getting no error with hacked image only black screen one green led in the middle no xell i think i need to reflow right???
now i am getting no error with hacked image only black screen one green led in the middle no xell i think i need to reflow right???
Martin C
VIP Member
tried that still don't work
the original still get 0022 error
the hacked black screen green led
the original still get 0022 error
the hacked black screen green led
Last edited:
Martin C
VIP Member
ECC should not give you 0022 as the code has this error patched out.
I know you're not using a NAND-x, so unable to help further.
I know you're not using a NAND-x, so unable to help further.
The console does not need a reflow this is something to do with the glitch
I have a jasper console with a coolrunner rev b installed.
Even when i rewrite the original nand i still get this error (0022).
I have done lots of searching on google etc and this is a common problem and of yet no one has found a solution for it.
My suspicion is that something has blown on the board as this only happened to me when i bridged the cap on the coolrunner to get faster boot times.
I will keep looking and let you know if i find anything
I have a jasper console with a coolrunner rev b installed.
Even when i rewrite the original nand i still get this error (0022).
I have done lots of searching on google etc and this is a common problem and of yet no one has found a solution for it.
My suspicion is that something has blown on the board as this only happened to me when i bridged the cap on the coolrunner to get faster boot times.
I will keep looking and let you know if i find anything
man i only want to know if it is software or hardware problem (reflow) because they told me i need to reflow because i didn't use fans during flashing with the usb stick for about 10 mins and now i am stuck with this rrod 0022 for about 3 weeks
thanks man i hope you find something because i think i am gona thorough this dame console away
Martin C
VIP Member
Send the console and original NAND to someone who knows what they're doing. You won't get 0022 with a correctly written ECC as this error is explicitly coded out to allow the RGH to work. Unless you got an overheat error (2RL), then the console should be ok still.
man i live in a country pro people using a towel to reflow .i think i am gona through it and buy ps3.
anyway thanks for help
Must be a country not on planet Earth...
It's been put out enough times that the "towel trick" doesn't fix anything and only does more harm than good and I like to believe that the human race has educated themselves and evolved and does not do this anymore.
That being said, your problem is something very simple and very easily fixed, but if you are not willing to put the effort into learning it and finding the resolve for your problem then you probably should indeed just throw the console away.
It's been put out enough times that the "towel trick" doesn't fix anything and only does more harm than good and I like to believe that the human race has educated themselves and evolved and does not do this anymore.
That being said, your problem is something very simple and very easily fixed, but if you are not willing to put the effort into learning it and finding the resolve for your problem then you probably should indeed just throw the console away.
i am trying for more than 3 weeks now tried everything and i am out of idea's now
Martin C
VIP Member
You're out of ideas because you don't know what you're doing. Like I said, send to someone else to fix it unless you've already damaged it beyond repair.
if i send it to someone in my country best thing he can do is using heat gun and reflow it and fix it for about month or more and then the console will be dead again
Fisticuffs
VIP Member
What dashboard was on it when you attempted the glitch?, Also I think your not writing the original nand back properly
the original is 12625 the hacked 14699
and is there a secret method to write the nand i use -w64 to write the nand and after write it i read it again to compare it with the original and it give me 0 non-matching block
Fisticuffs
VIP Member