Hello. I have installed a cr4xl with the v3 corona qsb exactly as team xecuter's tutorial. I installed a 4gb qsb read write adapter to read the nand. I read the nand and my two nanddumps compared. I have a corona v2 motherboard by the way and post out are ok. I checked my soldering under a microscope and all my connections are good. The problem is when I try to write ECC in JRunner, I get nothing in the field under the progress bar, which I thought it should say ECC successfully written or something like that but it says nothing and the Write ECC button is enabled. When I click Create ECC, ECC created is displayed in the field, but nothing when I click Write ECC. Another detail, on the CR4XL the green light and the red light are on and both are solid. Thanks for the help in advance. It would be greatly appreciated.
Help!!! Write ECC and no response in JRunner!
- Thread starter bware
- Start date
When you hit write ecc it wont start writing on 4gb consoles. There will show field on right side of j runner. Select drive you want write ecc to and hit write.
Maybe check soldering one more time. 4gb kit is quite tricky. Try different sd reader.
Green led shouldn't be solid. Check cpu rst wire and post out wire. Also check if you selected slim switch on cr4
Maybe check soldering one more time. 4gb kit is quite tricky. Try different sd reader.
Green led shouldn't be solid. Check cpu rst wire and post out wire. Also check if you selected slim switch on cr4
Plugged it back up and now im just getting solid red light. After selecting my drive in the field on the right and clicking write, jrunner now says the media is write protected. Here is a copy of the log below.
Wednesday, April 22, 2015 7:54:42 AM
J-Runner v0.3 Beta (7) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Corona 4GB Manually Selected
F:\
Reading from F:\ to C:\Users\bware\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Done!
in 0:04 min:sec
Initializing nanddump1.bin..
Corona 4GB
Glitch2 Selected
Nand Initialization Finished
F:\
Reading from F:\ to C:\Users\bware\Desktop\J-Runner v3 (5) Core Pack\output\nanddump2.bin
Done!
in 0:04 min:sec
Comparing...
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nands are the same
ECC created
Writing to F:\ from C:\Users\bware\Desktop\J-Runner v3 (5) Core Pack\output\image_00000000.ecc
The media is write protected.
Initializing nanddump1.bin..
Wednesday, April 22, 2015 7:54:42 AM
J-Runner v0.3 Beta (7) Started
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button
Checking Files
Finished Checking Files
Corona 4GB Manually Selected
F:\
Reading from F:\ to C:\Users\bware\Desktop\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Done!
in 0:04 min:sec
Initializing nanddump1.bin..
Corona 4GB
Glitch2 Selected
Nand Initialization Finished
F:\
Reading from F:\ to C:\Users\bware\Desktop\J-Runner v3 (5) Core Pack\output\nanddump2.bin
Done!
in 0:04 min:sec
Comparing...
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Can't check for bad blocks. No Spare data. Possibly Corona 4GB
Nands are the same
ECC created
Writing to F:\ from C:\Users\bware\Desktop\J-Runner v3 (5) Core Pack\output\image_00000000.ecc
The media is write protected.
Initializing nanddump1.bin..
Also by the way. I tested the xbox after installing everything and it still boots fine so i dont think i've broken anything. does the hdd need to be hooked up. I'll post some pics of my install later.
not sure what you are doing but if you have an micro sd card adapter make sure the write protect switch isnt on.
There is little switch - write lock on sd card adapter. Check if it is unlocked.
Also try to get some usb card reader. And check soldering on 4gb nand rw kit
Also try to get some usb card reader. And check soldering on 4gb nand rw kit