help xecuter3 just aint working

iceboy

Noob Account
Jan 4, 2005
3
0
uk
0
can anybody help me ive just finished my first install with the xecuter3 and xapt3r and when i press the power button the xbox turns on for a fue seconds with no screen. then it goes beep turns off and on a couple of times then the xbox power light flashes red and green and when i press the power button again the xbox just boots up normal with no chip install screens. it still plays orginal games
 

jonrees69

VIP Member
What LED's are lit, both on the chip itself (there are 2) and on the front panel.

Sounds to me like the DIP switches arent in the correct position, check they're all off to start, try it then post again.

J
 

iceboy

Noob Account
Jan 4, 2005
3
0
uk
0
the litlle circul arount the dvd draw button flashes

and the external switch thing is always red. except the HD light that works.

i have no idea about the switches on the front what do they do? :?
and how do i set them up mate. cus im lost
 

jonrees69

VIP Member
Jackdbum - I asked him already !! hehe :lol: and he didnt tell me ....

All the switches need to be to the left - this should work in most case.
RE-CHECK you D0 connection as this sounds like the problem - and then write out 100 times ....

use the search function and do some reading !!!!!!

J
 

iceboy

Noob Account
Jan 4, 2005
3
0
uk
0
when i look through the left side of my xbox only the far side of the chip is glowing blue is there supost to be a light on the nearest side to the vents you guys have been gr8 but i still need help ive took out the xadpt3r and used the pin thing but it still aint working its still turning off and on ........ :( and ill do those lines later ...



oh and all thi switchs are to the left but it aint working :cry: plz help
 

jackdbum

VIP Member
you will have to take it apart (your xbox i mean) to see the blue lights on the chip because they are on the other side to the vent, if this makes sense.

:)
 

UPEngineer

Junior Member
Dec 22, 2004
14
0
Chickasha, OK
I had the same problem as you did. Try this and see if it works:

push down gently on the xapt3r on the end opposite of the screw and then turn the power on (while still pushing the end down). If it was like my install it should not frag.

If this is the case, then get some foam and put it on the x3 chip so when you put dvd back in it compresses down and pushes the end of the xapt3r down. I've had no problems since then.

There is another post about this problem on this forum titled "XAPT3R won't stay down"


Good luck!
 

romracer

Loyal Member
Dec 6, 2002
419
0
Captain America: Super Soldier taking aim at July release date

With the Captain America film hitting theaters on July 22, it makes a lot of sense that the game will arrive around the same time -- July 19, actually, as revealed this morning by Sega. Alongside the new release date, Sega handed over several new screens of the Captain in action on Xbox 360/PlayStation 3, Nintendo DS, and Wii.

There's also the totally sweet shot of Cap hanging out in an airplane -- straight chillin' -- as seen above. You just know that any second he's gonna totally flip out. Aaaaany second now

Source