Help!!!!!!!!!!!!!

[Avalanchefan22]

Help!!!!!!!!!!!!!!!!!Whenever I try and flash I get an error message which reads:

Unknown flash ! Halted

And it just stays there it does it with everyone i try and download off xbins

Please Help

XB version: 1.4
Modchip: Xecuter 3

 

[Martin C]

Check that both your X3 and the switch have flash protection DISABLED: You should have 2 blue and one red LEDs on the chip, with DIP 5 on the switch set to 'off'.

Martin

 

[Avalanchefan22]

do u have aim

 

[Martin C]

do u have aim

lol no, but I have work in about 5 minutes!

Martin

 

[Avalanchefan22]

UmmmmmmmmmIm new to modding what are the LED's?

 

[Martin C]

LEDs - Light Emitting Diodes.

When you switch on the Xbox, your X3 should have three lights on it. (as above)

Martin

 

[Avalanchefan22]

I only see one which is the blue coming from the external switch

Plus I really appreciate your help

 

[Martin C]

You'll have to physically lift the lid on the Xbox to look at the chip itself.

Martin

 

[TeamX-cuter]

avalaunch you can look inside the side of your xbox and see your modchip and if there is a blue light then it means your x3 is not locked

 

[Rookio]

avalaunch you can look inside the side of your xbox and see your modchip and if there is a blue light then it means your x3 is not locked

Don't confuse the poor guy! Blue Led's have nothing to do with being locked or unlocked and it is the Hdd which you lock not the X3. If you are reffering to flash protect on the X3 chip, the options are RED (unprotect) and green (protect)

Do like Martin said and take off the cover, then lift out the DVD drive to see your chip. (don't have to disconnect them but be careful if you leave them plugged in! )