help

[Harley570]

i cant get my x box to flash... i tried eveything but whenever i upload the file it says its to large and its not flashing.. what do i do?

 

[tasemach]

are you using the X3 bios?

 

[Harley570]

yes i have x3.. i got everything turned on or off in the corredt order.. sometimes i can type the ip into the address bar and have it work sometimes i cant and i dont know what file i need to upload into the x box

 

[Shibz]

Make sure you got the right files, also make sure you have unzipped the bios file, don't just upload the RAR file. The file should have the .bin extention at the end of it. If it says .zip or .rar, you need to go to rarlab.com and download winRAR to unzip the files.

 

[scoob]

Need 360 JTAG Service/Repair - Missouri, USA

I've got a Falcon board I've successfully dumped the nand and obtained the CPU key through Xell on. Had alot of trouble with the DB1F point and alternates. When reassembled RROD. Having trouble getting working again. I also have NAND-X from Team-Xecuter installed to help.

Let me know if you have any suggestions / can help me out.

 

[Mini_Me]

Re: Need 360 JTAG Service/Repair - Missouri, USA

do u know how jtag a xbox 360 with 9199?

 

[mosely]

Re: Need 360 JTAG Service/Repair - Missouri, USA

I've got a Falcon board I've successfully dumped the nand and obtained the CPU key through Xell on. Had alot of trouble with the DB1F point and alternates. When reassembled RROD. Having trouble getting working again. I also have NAND-X from Team-Xecuter installed to help.

Let me know if you have any suggestions / can help me out.

Check your PMs