LITEON DG-16D4S - SLIM Hey modders need suggestion about the stock 9504 PCB

I

Imzsha

Full Member
Sep 7, 2011
57
0
Hey guys to start with I had 0225 PCB I got the key but unfortunately it burned out due to kamikaze hack but I managed to get hold of 9504 pre dashed unlock one my question is my 0225 was on 13416 dash so which firmware should I flash to 9504 PCB

Should I flash it with lt1.9 9504?
My second question is how can I update to 13599 if I update will my 9504 get locked pl reply waiting for early reply
 
rdubbs007

rdubbs007

VIP Member
Jan 18, 2011
3,327
118
The Internet | [email protected]
www.facebook.com
You need post 13146 firmware on the 9504 board then (which of course is 0272). You can leave it unlocked, but when you try to update to 13599 it will lock it. SO my advice if you are not comfortable unlocking the board again you should stay off live and on dash 13146 with that console and dont update at all.
 
C

chewyb

Senior Member
Feb 1, 2011
110
0
wisconsin
If you want to keep your 9504 unlocked you can swap it out with your 0225 board everytime you update, and then swap it back when you're done. This isn't recommended though. there's a chance you could get banned. Your best bet is to order Xecuter's Sputnik360 switch.

---------- Post added at 12:52 ---------- Previous post was at 12:50 ----------

as far as firmware, if your original drive is a 0225 then you want to flash it with lt 2.0 0225 fw
 
rdubbs007

rdubbs007

VIP Member
Jan 18, 2011
3,327
118
The Internet | [email protected]
www.facebook.com
chewyb said:
If you want to keep your 9504 unlocked you can swap it out with your 0225 board everytime you update, and then swap it back when you're done. This isn't recommended though. there's a chance you could get banned. Your best bet is to order Xecuter's Sputnik360 switch.

---------- Post added at 12:52 ---------- Previous post was at 12:50 ----------

as far as firmware, if your original drive is a 0225 then you want to flash it with lt 2.0 0225 fw
Click to expand...
You must have misread his OP. The original board is fried from his kamikaze attempt. Gone. Done. Cannot be used.
 
I

Imzsha

Full Member
Sep 7, 2011
57
0
Thanks for the replies guys if I flash it with lt1.9 0272 will I be able to play backups? What's the main difference between lt2.0 and 1.9?
 
C

chewyb

Senior Member
Feb 1, 2011
110
0
wisconsin
rdubbs007 said:
You must have misread his OP. The original board is fried from his kamikaze attempt. Gone. Done. Cannot be used.
Click to expand...
yep, missed that part. however, do not flash with 0272 fw if your original drive is a 0225. you have to use what ever fw your xbox came with

---------- Post added at 13:10 ---------- Previous post was at 13:01 ----------

lt 1.9 will play all original games, but will not play xgd3 backups
lt 2.0 supports xgd3 backups as well
 
Rocking360

Rocking360

Full Member
Oct 15, 2011
53
0
Imzsha said:
Thanks for the replies guys if I flash it with lt1.9 0272 will I be able to play backups? What's the main difference between lt2.0 and 1.9?
Click to expand...
I think - If Your Original Board Was 0225 You Need To Flash It with Lt 1.9 0225 ! LT+ 1.9 Won't Play XGD3 BACKUPS ,Original Fine & LT+ 2.0 Play XGD3 Backups and Originals !
 
You must log in or register to reply here.