RGH hi.sys update fail,can i rgh

J

jakekay

Junior Member
May 29, 2014
10
0
hi all.
i have a jasper stuck on "system update fail",i have tried usb and cd/dvd to update.
error is 3151-335A -xxxx-xxxx which is update from 12625 to 13146.(i think)
as i was hoping to rgh1 this xbox,whats best way,i have done jtag and rgh1 before.
is useing j-runner and getting doner nand,get cpu key and rebuild the way,
thanks in advance jk :( :confused: :eek:
 
J

jakekay

Junior Member
May 29, 2014
10
0
hi. thanks for that,but if i dump the nand wont the nand info be corrupted,
i can also get hold of another board,stuck between 14699 and 14719
could i keep this at 14699 to rgh1 it instead of rgh2,a bit simpler for me,
thanks jk
MY QUOTE OF THE WEEK "A LITTLE KNOWLEDGE IS DANGEROUS"
and that why i love this site,good info shared the more informed...
 
Krafter

Krafter

VIP Member
Apr 17, 2011
3,737
118
Indiana
No the NAND won't be corrupt. At least not in the way your thinking. When you create an ECC and an XeBuild image, only the essential parts of the NAND dump are used such as the KV. You could use J-Runner to create a new retail NAND after you get your keys that won't have the error anymore.

And as far as the other console, as long as it's a phat then yes is can be RGHed. There's no such thing as RGH1 on slims.

And really, almost any glitch chip is fine for RGH1. Even if it's not a TX product. You just won't get any support unless it is an authentic TX chip.
 
  • Like
Reactions: jakekay
john mathews

john mathews

VIP Member
Jan 3, 2014
2,551
88
peoria illinois
Krafter said:
No the NAND won't be corrupt. At least not in the way your thinking. When you create an ECC and an XeBuild image, only the essential parts of the NAND dump are used such as the KV. You could use J-Runner to create a new retail NAND after you get your keys that won't have the error anymore.

And as far as the other console, as long as it's a phat then yes is can be RGHed. There's no such thing as RGH1 on slims.

And really, almost any glitch chip is fine for RGH1. Even if it's not a TX product. You just won't get any support unless it is an authentic TX chip.
Click to expand...
He's talking about rgh on jasper not slim
 
Krafter

Krafter

VIP Member
Apr 17, 2011
3,737
118
Indiana
john mathews said:
He's talking about rgh on jasper not slim
Click to expand...
jakekay said:
hi. thanks for that,but if i dump the nand wont the nand info be corrupted,
i can also get hold of another board,stuck between 14699 and 14719
could i keep this at 14699 to rgh1 it instead of rgh2,a bit simpler for me,
thanks jk
MY QUOTE OF THE WEEK "A LITTLE KNOWLEDGE IS DANGEROUS"
and that why i love this site,good info shared the more informed...
Click to expand...

He didn't clarify exactly what the second board is. Could be anything. It also could be a Xenon which isn't worth even trying the RGH.
 
Last edited:
1

15432

VIP Member
Nov 14, 2010
703
68
Russia
stuck between 14699 and 14719
Click to expand...
if the second part of code says 14719, you can't setup RGH1 there, the CBLDV was already updated.
but you still can do RGH2 or R-JTAG, with CR4 it can be pretty reliable
 
  • Like
Reactions: Krafter
1

15432

VIP Member
Nov 14, 2010
703
68
Russia
jsinger47 said:
Actually, you need 15572+ for rjtag if I'm not mistaken
Click to expand...
yes, regular TX R-JTAG requires at least 15572 dash, but 1471* can be updated, so it's still possible to install R-JTAG on that Xbox :smile:
 
jsinger47

jsinger47

Troll Eating Dogs
Feb 6, 2011
8,133
128
Grand Rapids, MI
15432 said:
yes, regular TX R-JTAG requires at least 15572 dash, but 1471* can be updated, so it's still possible to install R-JTAG on that Xbox :smile:
Click to expand...
True, but he did say it was "stuck."

Although it is really only possible for an xbox to be stuck on a dash if it is a 4gb Corona with a dead MU
 
You must log in or register to reply here.