So I got a slim with no drive, RGH'd and even better it was a hitachi.
I enabled the nofrt patch and manual spoofed the key to a liteon 9504 drive and try and flash but when I do I get this -
Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 15148mS
Write verified OK !
Restoring sector 0x3E000.
Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
............
Authorisation Failed!
Restore Verify Failed !
it recognizes games on the dashboard but kicks me straight back to the dashboard when trying to load them.
the process I am doing is,
loading slim key
loading firmware
manuel spoofing and pasting in the key from J-runner
then flashing
am I going about this the wrong way?
I enabled the nofrt patch and manual spoofed the key to a liteon 9504 drive and try and flash but when I do I get this -
Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 15148mS
Write verified OK !
Restoring sector 0x3E000.
Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
............
Authorisation Failed!
Restore Verify Failed !
it recognizes games on the dashboard but kicks me straight back to the dashboard when trying to load them.
the process I am doing is,
loading slim key
loading firmware
manuel spoofing and pasting in the key from J-runner
then flashing
am I going about this the wrong way?