Okay, so I am currently trying to flash my Hitachi v47 360 and I am running across one problem. I used the two wire method and got it into ModeB so that is fine as of now but there is one thing that is confusing me. I go to flash the drive and I get an error. Here is the DOS prompt:
My drive is in Windows, I am using the right letter, and my drive is version 047 so 1, 2, and 3 are covered. However, I do not remember having to do part 4 and when I try to put a DVD in, it just pops right back out. I haven't tried turning my 360 off, putting a DVD in, and then redoing the ModeB thing but maybe somebody else could help.
Thanks. Hopefully I can get this done by tonight. :wink:
Code:
FLASHIX.bat
â•”â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•—
â•‘ â•‘
â•‘ C4EVA: iXtreme v1.2 Stealth â•‘
â•‘ HITACHI ALL VERSIONS 8in1 â•‘
â•‘ â•‘
â•‘ â•‘
â•‘ Updates your x360 DVD drive firmware â•‘
â•‘ â•‘
â•šâ•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•â•
What is the Hitachi drive letter?
F
Name the backup folder, use [Aa-Zz] [0-9]
No punctuations or spaces.
X16S-b5
. . . . . . . . . . . . . . . . . . . . . .
Making BACKUP of your DRIVE KEY...
Done.
Dumping CURRENT firmware...
Done.
The system cannot execute the specified program.
ERROR: Hitachi drive build was NOT detected!
WARNING: One of FOUR4 things could be wrong!
#1: Check to see if your drive is in Windows
#2: Make sure you are using the right letter
#3: Your x360 drive is not a working version
#4: Start mode B with DVD disk in the drive!
============================================
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\John\Desktop\Xbins\Downloads\iXtreme1.2_rev2_Hitachi_S
ense_Fixfw\iXtreme1.2_Hitachi_Sense_Fixfw\iXtreme-HitachiAll-RTMv3>Thanks. Hopefully I can get this done by tonight. :wink:
Thanks though.