how do i delete a bios

[HumaNort]

ok so i flashed my xbox with x3 3294 my xbox is a pal 1.4 with an x3ce in it but now when i boot it up it stalls on the xecuter rocks my box screen. the eject led flash orange im using an logic3 av cable as i lost mine but i tryed it with my mates cable the same thing happened. basicly i want to delete the bios thats on there and put another one on but it wont let me. i boot up the back bank and try to reflash it but just wont let me.it say no updated bios.... halting. any help would be great plus

thanks dave

 

[DJBOOBY]

have you set password in x3 bios
have you set dashboard boot priority in x3 bios
have you set dashboard boot drive =?

 

[HumaNort]

first off thanks for the reply.
i havnt done any of that as iv never got to the x3 config i flashed it and thats all i get i freezes on the "xecuter rock my box" i hav an 1.6 xbox chipped with the x3ce chip to. i dont no if that give me any more options but if u can help please do

thanks dave

 

[DJBOOBY]

were did you get bios
have you tryed to reflash bios to chip with one from xbins (try older one)
are your switchers set right on on off off off or off on off off off

 

[HumaNort]

the switch are right the 1mb banks i cant remember where the first bios was got from as it was done late at night but i can only think that i would of been xbins as for the older bios il try that today

thanks dave

 

[HumaNort]

ok so i tryed an older bios but all i got was "no bio update.... halting." would i b able to flash the chip in my xbox? my xbox is 1.6 pal with a x3ce tho. i read a tut on hotswaping but it wasnt for x3 is it posible with the x3?

cheers

p.s. sorry bout the double post

 

[DJBOOBY]

try flashing second bank with switch set to off on off off off
do this only if backup is working power eject at same time
unplug switch from chip and try and flash chip it will flash the frist 1mb bank

 

[HumaNort]

i tryed i to do that but no luck the back up works fine. when i try to flash the bios on "on on off off off" and "off on off off off" i got the no bios update msg the same for when the switch is not conected to the chip

 

[xX dArKsKaTa Xx]

You could always try an EvoX BIOS, but its not as good has x3.

 

[Infinite Mass]

i got the message on my box, the no updated bios, halted. my flash protection was on, the switch on the x3 chip. check your switch