TRINITY How do I fix this shiz

[Squirt]

Before I say anything, the console came to me like this :]

I'm generally new to jtaging I've built 3 Jaspers which is a start I guess, BUT what do i do when my points look like this



http://i.imgur.com/mGDimFa.jpg <Link to the picture>

Please help asap thanks
-Tom/Noob

 

[BL4K3Y]

Solder a piece of wire from the resistor (R3B15) to FT3N2 underneath the board (you can also use the trace or VIA running from that resistor).

Once that is done, you can solder a smaller piece of wire from the QSB solder point to the resistor or FT3N2.

 

[nofeloniesyet]

Before I say anything, the console came to me like this :]

I'm generally new to jtaging I've built 3 Jaspers which is a start I guess, BUT what do i do when my points look like this

View attachment 32003

http://i.imgur.com/mGDimFa.jpg <Link to the picture>

Please help asap thanks
-Tom/Noob

your gonna have to rebuild stby clk,by soldering a wire to side of that resistor,and other end either to the trace,or to the via it ends at.

edit: well then just f**k you blakey,lol
btw you should tell whoever did this if they had just gone a bit further into the board,they may have struck gold,lol.