CK3 PROBE How to cycle drive without power kit?

[greendayfreakrct]

Hey all i've done tons of modding for the xbox 360, but never with a lite-ion.

I have the Prove 3, and im just going to be using the xbox 360s power to do everything. I don't care about flags, and what not it will be staying offline.

Anyways for the step of having to cycle the DVD drives power.

"You need to power cycle the drive (turn the CK3 Pro power switch OFF then ON) when the drive status displays as 0x90. Your drive will then switch to vendor mode ( 0x72 ) and you are ready to write data to the drive. To program the firmware click the Write button."

What's the best way to go about this?

Does the switch on the probe do this? Or do I have to do the half open tray thing. Pressing the eject button, and then pulling the power cable from the DVD drive that's connected to the probe? Then closing the drive half way?

Thanks for the help.

 

[wtiger46]

You just turn it off and on again. With the power button.

 

[greendayfreakrct]

You just turn it off and on again. With the power button.

So turn the 360 off, and back on with it's power button?

 

[Moroccain]

the best way is to unplug the power from the sector good luck

 

[greendayfreakrct]

But just turning the xbox off, and on will work?

 

[BGAMods]

so youre actually coming on this forum asking how to do something which would bypass the need for our product.

ill go easy on you as youve brought the probe 3 but thread closed.