How to dump prod.keys on SX core v1

[happydance]

So I've bought SX core so I could mod and create mods for some games.
The switch keys are kinda important on achieving those, and most guides/topics on lockpick are RCM related.

are payload even usable on SX-core? there's a payload option on the power + VOL+ combo

I'm on 10.0.4 Emunand
Sysnand is on 5.0.10

It seems I can no longer boot on sysnand/OFW when I have updated to 10.0.4 on emunand. Emunand works fine though.

 

[abk14459]

Download LockPick.nro and just start it from homebrew once and it will automatically dump prod.keys file

 

[happydance]

it can only dump keys up to 6.2.0 and it's incomplete/can't dump all keys only 41 keys

 

[jaycie]

?

 

[Raoul_PP]

You need Lockpick_rcm.bin on your root of your sd card.
then use tegrarcmgui with the Volume UP button pressed and then press the power on button on the switch.
That will get you into RCM mode.

LockpickRCM doesn't need anything on the SD card, as long as it's formatted in FAT32, you'll be fine.

 

[jaycie]

F.nktioniert ja nicht mit sx core

 

[Raoul_PP]

F.nktioniert ja nicht mit sx core

Das is nicht war...

you can use tegrarcmgui with lockpick_rcm.bin. on V1

- The sd card must formated to fat32.
- Place only lockpick_rcm_bin on it.
- Start tegrarcmgui and on the switch press vol up and then power.
- Inject Lockpick_RCM.bin with tegrarcmgui
- The switch will boot with lockpick_rcm.bin
- Press power on the first choice and the keys will dump.

I have tested my self and it works.

 

[Grimlock97]

He has probably ipatched. Lockpick_RCM.bin does not work on SX Core.

 

[jaycie]

ja genau war 50/50 Chance ob gepatcht oder nicht

 

[happydance]

Das is nicht war...

you can use tegrarcmgui with lockpick_rcm.bin. on V1

- The sd card must formated to fat32.
- Place only lockpick_rcm_bin on it.
- Start tegrarcmgui and on the switch press vol up and then power.
- Inject Lockpick_RCM.bin with tegrarcmgui
- The switch will boot with lockpick_rcm.bin
- Press power on the first choice and the keys will dump.

I have tested my self and it works.

it loads on a lower firmware V1 sx core, BUT a lot of keys are still missing some keys dump are invalid especially the bis_key, also there's a corrupted keyblob error.
Biskey dump from the nro are valid

 

[goconnect]

it loads on a lower firmware V1 sx core, BUT a lot of keys are still missing some keys dump are invalid especially the bis_key, also there's a corrupted keyblob error.
Biskey dump from the nro are valid

so any good method to copy the correct files out?
Thanks

 

[happydance]

I do not know, that's why I made this post to ask for a better method or support on how to dump the prod.keys files correctly and complete.