How to find a secondary error code FOR NOOBS!

[DaRkO]

here you go.

to find your secondary error code:

• Turn the xbox 360 on, and wait till the 3 red lights are flashing.
• Press and hold the sync up button (the small white one), while holding that button press the eject button.
• The LEDs will now blink the first number in the code (as described below).
• Release the eject button and press it again.
• The LEDs will now blink the second number of the code.
• Release the eject button and press it again.
• The LEDs will now blink the third number of the code.
• Release the eject button and press it again.
• The LEDs will now blink the forth number of the code.
• Release the eject button and press it again.
• The LEDs will go back to the 3 red flashing lights.

You should be able to determine the difference between the 3 flashing lights and the error code lights by the rate in which they flash.

Here is how you interpret the LEDs to get the code number:

• All four lights flashing - 0
• One light flashing - 1
• Two Lights flashing - 2
• Three lights flashing - 3

- From www.llamma.com
-http://www.llamma.com/xbox360/repair/Xbox-360-error-codes.htm

 

[tony1160]

your link to (((( www.llama.com )))) seems to be nothing to do with error code's.

use this one http://www.llamma.com/xbox360/repair/Xbox-360-error-codes.htm

the guide was taken from xbox scene so it seems your just linking forum to forum to.....

 

[modmonster]

Or you could read this info from teajunkie in the guides and tutorials section from march.
http://team-xecuter.com/forums/showthread.php?t=53386&highlight=secondary+error+code

 

[DaRkO]

whoops i must have mistyped llamma *facepalm* fixed now thanks.

and modmonster i didnt know thanks, i did a search but couldnt find one and btw i mainly did this to put in my sig, thats not agianst the rules is it? sorry if it is.

 

[modmonster]

No that's fine in your Sig

 

[Heavy Smoker]

edit: wrong thread sorry