how to flash ihas124B drive?

[o0iiscopejews0o]

hi im new to this site and mayb its posted somewhere bout this same question, but i cant find it newhere.:facepalm:

can someone lead me to the correct link and tell me how todo it as im new and willing to this kind of stuff.

thanks Tom

 

[ezzda1]

http://www.team-xecuter.com/forums/showthread.php?t=73745

 

[o0iiscopejews0o]

thnx ezzda1, yur a legend!

 

[o0iiscopejews0o]

done all of the above and now the disks reads 8.13 in my computer so i know its flashed ok, installed the lastest imgburn software, but i got error when i tried to burn the disk. im using aone disks... help?

 

[DUSTYB3N]

The answer is in your post. The only supported media is VERBATIM

Sent from my iPhone 4S using Keyboard

 

[tonyjandc]

dusty i have used aone and they have worked for me cant say i would recomend though lol anyway o0iiscopejews0o check your settings and make sure topology is added also goto bookmarks and change media to dvd rom in imageburn use agbx for topology insert and use dvd file created this will give you correct layerbreak. make sure burn speed is at lowest as well .

 

[DUSTYB3N]

Cheaper, lower-grade discs have greater areas of inconsistent dye at the outer tracks than higher-grade discs, such as Verbatim do. This isn't an opinion; it's not debatable; it's a fact so live with it!!

This is why c4eva has reported that only Verbatim discs have been burning consistently error-free. The statement, "But, my cheaper discs have always worked fine," is irrelevant as you will be burning them with a capacity they were never designed for.

Don't be a cheap ass and use 6x-8x Verbatims (These will be MKM003's though you will be burning at 4x)


Sent from my iPhone 4S using Keyboard

 

[ChefBoyArDizzl]

Cheaper, lower-grade discs have greater areas of inconsistent dye at the outer tracks than higher-grade discs, such as Verbatim do. This isn't an opinion; it's not debatable; it's a fact so live with it!!

This is why c4eva has reported that only Verbatim discs have been burning consistently error-free. The statement, "But, my cheaper discs have always worked fine," is irrelevant as you will be burning them with a capacity they were never designed for.

Don't be a cheap ass and use 6x-8x Verbatims (These will be MKM003's though you will be burning at 4x)


Sent from my iPhone 4S using Keyboard

I have a quick question. What's the difference between mkm003 and mkm001. I've been using mkm001 verbatims with no problem so far, just wondering if I should switch?

 

[cloveskat]

the 003's are up to 8 x i believe.. i always burn at 4x and have no probs

 

[jacobrubio]

Cheaper, lower-grade discs have greater areas of inconsistent dye at the outer tracks than higher-grade discs, such as Verbatim do. This isn't an opinion; it's not debatable; it's a fact so live with it!!

This is why c4eva has reported that only Verbatim discs have been burning consistently error-free. The statement, "But, my cheaper discs have always worked fine," is irrelevant as you will be burning them with a capacity they were never designed for.

Don't be a cheap ass and use 6x-8x Verbatims (These will be MKM003's though you will be burning at 4x)


Sent from my iPhone 4S using Keyboard

I used the Media Code Speed Edit to create my own speed hack firmware for my Memorexs.All it did was change my write speed to do only x2.4.I did this after three bad XGD3 burns and it ran through error free.They have not brought me one single error in play yet

 

[mrdrifta]

yea 003's are upto 8x speed. I've been using 001's at 2.4x with no problems, just takes FOREVER! to burn lol the next batch of discs im getting are definately going to be 003's. 45mins to wait for a burn is painful IMO

 

[DUSTYB3N]

I used the Media Code Speed Edit to create my own speed hack firmware for my Memorexs.All it did was change my write speed to do only x2.4.I did this after three bad XGD3 burns and it ran through error free.They have not brought me one single error in play yet

I would like to see the Kprobe results if you could post them? And when you say in play? I presume you mean the game plays/installs ok. That doesn't mean it's a good burn.


Sent from my iPhone 4S using Keyboard

 

[jacobrubio]

I would like to see the Kprobe results if you could post them? And when you say in play? I presume you mean the game plays/installs ok. That doesn't mean it's a good burn.


Sent from my iPhone 4S using Keyboard

ok

 

[jacobrubio]

I would like to see the Kprobe results if you could post them? And when you say in play? I presume you mean the game plays/installs ok. That doesn't mean it's a good burn.


Sent from my iPhone 4S using Keyboard

Date : 3/13/2012 6:28:21 PM
Model : 3-0-0-0 ATAPI iHAS124 B AL0S
Disc : DVD+R DL , MBIPG101R10A [Moser Baer India Limited]
Speed : Max
ECC blocks sum (PI/PIF) : 8/1
Scanned range : 0 - 4267021
Sampling count : 241196
Errors : 0
PI Max : 89
PI Average : 20.05
PI Total : 622452
PIF Max : 8
PIF Average : 1.76
PIF Total : 54497

 

[Racoon]

Same here, if you read the posts and do it right you will have no problems.

 

[alefus]

I'll spam this until the end of times because it did wonders to me and I had like 10 coasters before this revelation of sorts

Speed 4x
OPC off
Smart Burn On
Force HyperTuning off
Online HyperTuning off
OverSpeed off

Using Verbatim MKM-003s. The recommended values where OPC on and SB/FHT on, because they are firmware-default, but OPC ALWAYS resulted in huge spike/failed verification on layerbreak, at least for me, and with FHT on the results were high above the recommended PI/PIF values. With these settings I have this, just burned a backup.

 

[DUSTYB3N]

Date : 3/13/2012 6:28:21 PM
Model : 3-0-0-0 ATAPI iHAS124 B AL0S
Disc : DVD+R DL , MBIPG101R10A [Moser Baer India Limited]
Speed : Max
ECC blocks sum (PI/PIF) : 8/1
Scanned range : 0 - 4267021
Sampling count : 241196
Errors : 0
PI Max : 89
PI Average : 20.05
PI Total : 622452
PIF Max : 8
PIF Average : 1.76
PIF Total : 54497

The kprobe results should be:
Pi max 100 or less
Pi adverage 5 or less
Pif max 5 or less
Pif adverage 0.20 or less

So this is clearly not a good burn! Stop wasting time buy verbatim, simples!!


Sent from my iPhone 4S using Keyboard

 

[Tye-Dye]

Get some mkm001's and burn at 4x and your golden.