When posting your XGD3 results make sure you include the following info. if you don't then your post will be deemed as useless and will be deleted and you will probably lose access to the forum.
Post the following images - remember to include the summary that includes the media code and pi/pif values

Include your EEPROM settings e.g
Smartburn = enabled
Force Hyper Tuning = enabled
Online Hyper Tuning = enabled
and IMGBURN settings e.g
OPC = enabled
Burn Speed = 4x
Include your connection setup (SATA Chipset and mode, or USB)
If you don't know any of the above info - dont bother posting as you won't understand how to do any of this anyway.
Post the following images - remember to include the summary that includes the media code and pi/pif values

Include your EEPROM settings e.g
Smartburn = enabled
Force Hyper Tuning = enabled
Online Hyper Tuning = enabled
and IMGBURN settings e.g
OPC = enabled
Burn Speed = 4x
Include your connection setup (SATA Chipset and mode, or USB)
If you don't know any of the above info - dont bother posting as you won't understand how to do any of this anyway.