RGH How to put back again the Retail Microsoft Image

[krist]

What have you done with the console since the original dump? Did you update it before starting the Coolrunner stuff or have you updated it since?

BTW, freezing is caused by the cable positioning.

I followed the FiB3R's Glitch guide and I successfully installed dashlaunch, when I power on the xbox it boots and I can play my dvd backups but sometimes the xbox freeze and I can do nothing, only shutdown the console and restart again...

I checked my cables positions, put away from coils, used an cap between A and GND but don't work...

---------- Post added at 16:27 ---------- Previous post was at 16:23 ----------

if you saved your stock unmodded nand, why would you then need to create one?

I don't knew it I could re-flashing the nand with my nanddump.bin, but when I put back again the nanddump.bin the xbox don't boot...

 

[afsilver]

Don't forget to disable coolrunner before you boot retail nand!
If it still don't boot you have read your nand badly or your soldering is at fault..

Sent from my GT-I9100 using Tapatalk

 

[Martin C]

Remember that you're tapping into CPU_PLL_BYPASS and CPU_RST.

The normal route for these points avoid areas of interference. You need to make sure you're doing the same thing with your soldered wires.

 

[krist]

Remember that you're tapping into CPU_PLL_BYPASS and CPU_RST.

The normal route for these points avoid areas of interference. You need to make sure you're doing the same thing with your soldered wires.

Ok...I tried put the wires in different positions and now I think I can make it... No freezes anymore....for now
Thanks