LITEON DG-16D4S - SLIM Huy guys I need some help..

ModdedGamers

Senior Member
Aug 7, 2012
115
0
California
U need to set jf to phat and intro the PCB it will come up in vendor mode. You kbow the PCB come blank :what:

Sent from my PC36100 using Tapatalk 2
Yes I know that.. Now I made sure I was updated to the correct version on XUSB PRO and re-updated it but still nothing.
 
Last edited:

ModdedGamers

Senior Member
Aug 7, 2012
115
0
California

doe1200

VIP Member
Feb 21, 2011
460
48
northern ireland
If the TX Unlocked PCB doesn't detect at all and you can't get into vendor mode with the above method simply click Liteon-Erase and power cycle - you should then get into vendor mode (0x72) with no problems.
 

ModdedGamers

Senior Member
Aug 7, 2012
115
0
California
If the TX Unlocked PCB doesn't detect at all and you can't get into vendor mode with the above method simply click Liteon-Erase and power cycle - you should then get into vendor mode (0x72) with no problems.
Okay and should I keep the switch on the PCB on unlock or lock?
 

ModdedGamers

Senior Member
Aug 7, 2012
115
0
California
Okay and should I keep the switch on the PCB on unlock or lock?
Tried and it says "Device Intro failed!"

---------- Post added at 15:52 ---------- Previous post was at 15:51 ----------

put the switch to wp1 unlock
wp1???

---------- Post added at 15:54 ---------- Previous post was at 15:52 ----------

okay keep on unlock when I erase it?

---------- Post added at 15:55 ---------- Previous post was at 15:54 ----------

still failed