i am a newbie and done all the searching before posting

[WILL(.) (.)]

i have the 2.6 ce lite and i and adding a 80gig hard drive and i cant flash a bios and i cant do anything can yall send me the forum or ne thing that i need to help me out . i would greatly apperciate it and i have tired flashing and everything and my chip only work is bank 2 bank 1 gives me fragging what do i do?

 

[islander223]

You should provide more info like your xbox version, and how did flash your box. If you can access your bank 2 with flashbios then your install might be good and what you need now is to flash an X2 bios like X2_5035 (be sure to use the correct bios version for your xbox version ie: x2_5035_old for v1.0-1.5 & X2_5035_16plus for v1.6/1.6b).

If you're flashing using disc, use cd-rw or dvd-r or better yet flash via HTTP...it's easier.

 

[WILL(.) (.)]

i was flashing from http. then after i flashed it did the 3x boot thing and nothing was on the screen. i have a version 1.4 or 1.5 xbox, not exactly sure. i think the executer has some kind of recovery mode to recover from a bad flash, but i just dont know how to get to it.

 

[MKChampion]

the x2.6 doesn't have a backup bank like the X3
if one of the banks is still operational than you should go ahead and flash X2 5035 using this tutorial
www.teamxecuter.com/flashbios

then you can check out some tutorials on how to install a new hdd to your box at xbox-scene

 

[WILL(.) (.)]

is ther a way i can make one accessable again cause something went wrong with the banks and it frags on both of them but when the chip is off it works fine? i dont understand this crap

 

[MKChampion]

both of your banks are shot and you will now need to get a hold of a programmer and flash your chip that way or get another box with a chip and do a hotswap

programmer tutorial
http://teamxecuter.com/forums/showthread.php?t=24542

hotswap tutorial
http://www.xbox-scene.com/articles/flash-dead-modchip.php