RGH i cant boot xell
- Thread starter HeLL HAZARD13
- Start date
1. Did you write xell to the nand?
2. Is the green light on the coolrunner flashing? If not check your wires.
2. Is the green light on the coolrunner flashing? If not check your wires.
my green light blinks here and there ?
---------- Post added at 01:05 ---------- Previous post was at 01:04 ----------
and what do u mean write xell to my nand i already have my ecc
I gotta ask, since i´ve seen so many REALLY DUMB questions from you.
What rev. xbox do you have?! Xenon, Zephyr, Falcon, Jasper, Trinity
(Asking becouse it is said you have a xenon in one of your old threads)
Yeah harsh, but dude, you are not READING any tutorials and need active help with EVERY STEP. Wouldn´t mind if i saw you put some effort into creating a thread with complete info with pics, exactly what you have done and with what etc etc etc etc etc, but you just lazy...
What rev. xbox do you have?! Xenon, Zephyr, Falcon, Jasper, Trinity
(Asking becouse it is said you have a xenon in one of your old threads)
Yeah harsh, but dude, you are not READING any tutorials and need active help with EVERY STEP. Wouldn´t mind if i saw you put some effort into creating a thread with complete info with pics, exactly what you have done and with what etc etc etc etc etc, but you just lazy...
now thats were u are wrong i do read it i just do not get it put your elf in my shoes and when u saw that i had a xenon i was going to do anouther rgh but i cant since it has no hdmi ..i do put alot of effort in what i do i just dont want to mess anything up since this is my 1st rgh is getting any help relly bad!?
---------- Post added at 01:24 ---------- Previous post was at 01:20 ----------
i made my ecc by useing jtag tool and when i finally programed my CL and i thought everything was good but my xell would not boot and the green light blinks when i turn on the xbox and i read that its good but idk whats happening
are you following any of the guides
if not try this one FiB3R's Glitch guide
step by step instructions.. you might find where you have gone wrong
if not try this one FiB3R's Glitch guide
step by step instructions.. you might find where you have gone wrong
Last edited:
Still proving you do not read as you did not answer a simple question:
What revision xbox do you have?
Just reply with one word, either: Xenon, Zephyr, Falcon , Jasper, Trinity
You still have not made a post that resembles correct standards:
1: Photos
2: Exactly what you have done in detail up to now (Programs used, timing files flashed etc etc etc etc etc)
3: Please use some form of spell-checker. Your posts are really hard to read
Again, take this the right way. It´s not that we do not want to help or are having some superiority complex, you NEED to stop and listen and do this correctly!
What revision xbox do you have?
Just reply with one word, either: Xenon, Zephyr, Falcon , Jasper, Trinity
You still have not made a post that resembles correct standards:
1: Photos
2: Exactly what you have done in detail up to now (Programs used, timing files flashed etc etc etc etc etc)
3: Please use some form of spell-checker. Your posts are really hard to read
Again, take this the right way. It´s not that we do not want to help or are having some superiority complex, you NEED to stop and listen and do this correctly!
i did read it all i cant take any photos right now cause my sister took the cameraStill proving you do not read as you did not answer a simple question:
What revision xbox do you have?
Just reply with one word, either: Xenon, Zephyr, Falcon , Jasper, Trinity
You still have not made a post that resembles correct standards:
1: Photos
2: Exactly what you have done in detail up to now (Programs used, timing files flashed etc etc etc etc etc)
3: Please use some form of spell-checker. Your posts are really hard to read
Again, take this the right way. It´s not that we do not want to help or are having some superiority complex, you NEED to stop and listen and do this correctly!
i have a falcon
i first used jtag tool and used that to read my nand and to write my ecc and to program my cool runner i just a lpt wire and the software i used was impact
---------- Post added at 01:45 ---------- Previous post was at 01:44 ----------
that is the one i was useing
Try writing your ecc again. Build it with multibuilder this time. Sometimes writing it again sorts the problem. If you've only written your ecc then you don't have to power using the eject button as it will only try to boot xell regardless.
Sent telepathically using Tapatalk
Sent telepathically using Tapatalk
something isn't working so chances are you've done something wrong.
multibuilder has always worked for me but I've read about problems with jtagtool.
try it all again just to rule it out if it still doesn't work it could be your wiring.
have you made sure your wires are routed as per uber's guide
multibuilder has always worked for me but I've read about problems with jtagtool.
try it all again just to rule it out if it still doesn't work it could be your wiring.
have you made sure your wires are routed as per uber's guide
i just finished checking all the wires ill do what you told me tomorrow cause i got school and its late thanks for all the help every one talk to you tomorrow