i cant identify this one need somehelp about this one guys

[foxmaster]

 

[jdoe91011]

Have you read this?: http://team-xecuter.com/forums/showthread.php?t=96752

12 Volts at 10.83A generally implies a Trinity, whereas 12 Volts at 9.6A generally implies a Corona. The only thing I can make out on your label is 12 Volts...what else does it say?

That looks like a 16MB NAND.

Which resistors are present/missing below the J2C3 header?

Does the motherboard have it's POST_OUT?

Does the motherboard have a HANA chip? google what one looks like if you don't know. Corona's do not have HANA chips, Trinity's do. This can be an identifying factor for you.

 

[Martin C]

Any slim with an addon MU (like above) is a Trinity.

The presence of a HANA chip also confirms this.

 

[foxmaster]

so i just move this one away and glitch it like normal trinity ?

 

[Martin C]

Move what away? It's the Memory Unit. Leave it there.

 

[foxmaster]

is it 4gb ?

 

[foxmaster]

it has hana chip

 

[foxmaster]

Move what away? It's the Memory Unit. Leave it there.

so do i glitch it like i do to corona v2 ?

 

[Martin C]

It's a Trinity. You follow the directions for a Trinity installation.

 

[foxmaster]

so i just glitch it like normal trinity this memory unit doesnt make any difference ?

 

[qalsan]

ur xbox is slim and 4gb memory , and a trinity motherborad ,

 

[foxmaster]

so what i need to glitch it ?

 

[RayBray]

Jr Programer, trinity QSB (optinal) and slim proto V2.

Please do your research before asking.

 

[foxmaster]

TX 4GB R/W kit do i need this too ?

 

[RayBray]

No this kit is only used for corona v2 v4 systems. You have a trinity and it will be fine with out it.

 

[foxmaster]

i dont move memory unit while i solder and read nand right ?

 

[qalsan]

Jr Programer . and c.r chip

 

[RayBray]

Ok i'm only going to type this once.

1st: Solder on the QSBs (or the cables)
2nd: Solder on the Coolrunner or Proto V2
3rd: Program the coolrunner (if using Proto V2 ignore this step)
4th: Reed your nand, make sure you dont have any bad blocks and make 2 or more back ups
5th: Wright the ECC file
6th: Get the CPU key and DVD key. Make 3 or more back ups.
7th: create the unlocked boot image. (sorry cant remember the official name)
8th wright the file with the CPU key in the wright box.
and finally boot and play.

 

[hersheys247]

so i just move this one away and glitch it like normal trinity ? View attachment 26256

is it 4gb ?

so do i glitch it like i do to corona v2 ?

so i just glitch it like normal trinity this memory unit doesnt make any difference ?

so what i need to glitch it ?

TX 4GB R/W kit do i need this too ?

i dont move memory unit while i solder and read nand right ?

WTF?

Open up and say ahhhhhh!