I can't move

[niterun2]

I get the flashbios 3.01 but I can't get it to move to the CD/DVD or c:\bios or network , I see my DVD and Harddrive at top but it won't let move! I checked all my connections, I tried it in another XBOX with an X2 mod same thing the X2 mods works, there's no disc in the drive,I did try it with it in there also same thing,it's an XBOX 1.5,just to try I have pushed the power botton longer to see it boot normal and the eject and power @ same time to see the logo on switch turn purple still same thing, I know I'm surpose to move to the CD/DVD and push the A button but it don't move, I have tried pushing all the buttons but it does nuthing.HELP PLEASE!!!!!!!!!!!!!!!

 

[DJBOOBY]

it your controller you need to use a ms controller(not aftermarket) and some of them dont work a xbox dvd remote works allso

 

[niterun2]

I get the flashbios 3.01 but I can't get it to move to the CD/DVD or c:\bios or network , I see my DVD and Harddrive at top but it won't let move! I checked all my connections, I tried it in another XBOX with an X2 mod same thing the X2 mods works, there's no disc in the drive,I did try it with it in there also same thing,it's an XBOX 1.5,just to try I have pushed the power botton longer to see it boot normal and the eject and power @ same time to see the logo on switch turn purple still same thing, I know I'm surpose to move to the CD/DVD and push the A button but it don't move, I have tried pushing all the buttons but it does nuthing.HELP PLEASE!!!!!!!!!!!!!!!

I tried 3 different controller's then the TV remote was the only thing that worked!!! then I would get "Unknown flash! halting" and because of the all post I tried about 25 settings on the switch and just as many bios files, then I read don't even use the switch so I tried all the bios files I had just to get the same message AGAIN then I read that the switch on the modchip can be lable wrong sometimes SO with the modchip in the "Protect" setting and NO switch and useing the Xbox TV remote I was able to Flash my modchip!!! Who ever made this X3 modchip needs there A$$ kick for about a week because that's how long it took me to flash it.

 

[B-Dog]

If you're getting the "Unknown Flash! Halting" error, look on your chip. There was a period in time where Xecuter inadvertantly labeled their chips in reverse (red=protect; green=unprotected).

As for your controller dilemma have you been plugging the Microsoft controller into the 1st controller socket? If you are using a Microsoft manufactured controller in Socket/Port 1 it should work. If not, no big deal you'll most likely never deal with it again (unless the actual port is non-functional).

 

[DJBOOBY]

Who ever made this X3 modchip needs there A$$ kick for about a week because that's how long it took me to flash it.

its not the x3 that the prolbem its flashbios

I read that the switch on the modchip can be lable wrong sometimes SO with the modchip in the "Protect" setting and NO switch and useing the Xbox TV remote I was able to Flash my modchip!!!

B-Dog need to read post before posting

 

[B-Dog]

I apologize for that post, I know I should read everything, but as soon as I read about him mentioning the "Unknown Flash! Halting" message I immeadately thought: mislabeled chip!

Why? Do you, DJB, know of anything else that causes a flash to halt w/ that error?

 

[shagga]

A incorrectly formatted bios file perhaps...