I messed up my install. Help

[fieropunk]

I got everything installed and on my last wire I messed up. I believe I can fix it but I need to know what the value of the resister I have circled below. I think its 9.8K but I just want to be sure.

My soldering iron stuck to solder pad and pulled the whole trace out. I don't feel like giving up so I going to try and fix it.

 

[Martin C]

It's a 10k resistor.

If your iron pulled the point, then I would recommend getting someone else to finish the job before you permanently damage the board (if you've not already done so.)

 

[diaboliq20]

yeah - as Martin said - if your iron got stuck and pulled the pad AND trace then you need a new iron mate - or at least get someone to take a look at it for you.....it's an easy point to solder to as you don't actually need to touch the pad - it's a quick dab and the wire takes - steady hand is all you need...but hindsight is a wonderful thing I guess lol....

tbh though - if you didn't manage t solder to the point, then soldering a replacement 10k resistor is NOT going to be an easy task mate