I Need a trinity donor nand!

G

genio123

Full Member
Mar 27, 2006
28
0
Italy
www.digitalangel.it
Hi guys... I have a problem:
Everything started when the glitchboard installed on my trinity wasn't glitching...
I though it was the chip, but after some googling, i found out that the chip was ok, so i decided to switch back to original nand:
Result?
The XBOX360 starts, xbox360 globe appears... then BOOM ! E79, Red dot of the dead! the sub-error code is "can not execute xam.xex"
So my nand dump was corrupted in any way, but i can always open it with nand tool and extract RAW KV and Config...

Here's the question: can anyone send me his good trinity nand dump? I searched for it , i found every nand but not the trinity!

Please... help me.
Thanks.
 
S

smalltylynch

VIP Member
Oct 11, 2010
176
0
AUS
genio123 said:
Hi guys... I have a problem:
Everything started when the glitchboard installed on my trinity wasn't glitching...
I though it was the chip, but after some googling, i found out that the chip was ok, so i decided to switch back to original nand:
Result?
The XBOX360 starts, xbox360 globe appears... then BOOM ! E79, Red dot of the dead! the sub-error code is "can not execute xam.xex"
So my nand dump was corrupted in any way, but i can always open it with nand tool and extract RAW KV and Config...

Here's the question: can anyone send me his good trinity nand dump? I searched for it , i found every nand but not the trinity!

Please... help me.
Thanks.
Click to expand...
with out your CPU key you screwed try and re write your nand again and just hope
 
Martin C

Martin C

VIP Member
Jan 10, 2004
35,981
0
Scotland, UK
www.team-xecuter.com
Of course this is resolvable.

Multi_builder etc only need a few files from your dump to build a new image, so carry on with the image you have.
 
G

genio123

Full Member
Mar 27, 2006
28
0
Italy
www.digitalangel.it
Martin C said:
Of course this is resolvable.

Multi_builder etc only need a few files from your dump to build a new image, so carry on with the image you have.
Click to expand...
i used multi builder and it successfully created an ecc file... i wrote it with the "+w16" and it went fine... but still i cant glitch ... when i power the xbox360 on it simply stays with the green power led. nothing more.
(the coolrunner is set to NOR and SLIM, while having the red PWR led powered up, like the green DBG blinking)

PS: how i can create a new working nand using my semi-working one? is there a way? Thanks
 
Last edited:
Netkar

Netkar

VIP Member
Apr 27, 2005
389
33
post photo and we will see if something wrong
 
S

splatem

Full Member
Aug 6, 2011
79
0
Sth Island, New Zealand
Regarding the original post, if you want to go back to original NAND image you will need to use the -w16 option with nandpro. It will give you an e79 error if you write the original NAND with +w16, this option is for modified NAND images.
 
G

genio123

Full Member
Mar 27, 2006
28
0
Italy
www.digitalangel.it
First of all, i would like to excuse myself for the wrong section, i saw it right after i sent my topic :facepalm:
Then, i'm happy to say that i'm safe and sound with my glitch freeboot!

That's how i do it:

I had 1 nand image which i knew it had some bad sector in the lastest blocks (somewhere after sector 320)

I based my ecc with that image, and the results that it wasnt glitching...:rolleyes2:

I flashed back my nand (the first with the f**ked sectors around 320...) and it gave me E79 like i said in the OP.

Solution:

I wrote with -w16 the glitched image (i read that after applying the .ecc image to the nand) and after i wrote only the first 50 sectors of my "320 bad nand dump" with:
Nandpro usb: -w16 badnand.bin 0 50

Ta daaan! It was booting fine!

So i done again all the steps and now im an happy glitched user !! :D

Thanks to all, i hope that my experience will be useful to someone.
 
O

ol' dirty ewok

Junior Member
Jan 29, 2011
17
0
dgenx said:
if needed i have one.no bad blocks.
Click to expand...
I'm in the need of a Doner trinity Nand. I got no bad blocks on my original that I accidentally overwrote with nand w/ECC.

Was able to boot into Xell and grab my keys.

I would appreciate the help!

Thanks
 
You must log in or register to reply here.