I need help to identify my console xbox360 corona

[alfawalidou]

hi everyone
i'm new here and i would like to thank everyone for the excellent work you all did on this forum.

1- i have xbox360 slim corona but i'm not sure of the version
on this post they said it's corona v2 without hdd
http://team-xecuter.com/forums/thre...l-Corona-Motherboard-Identification-Solutions
but my console it has 250gb hdd, i'm very confused about this point

2- what do you think about X360 Mega Mod chip because i just purchased one?


click on each picture to enlarge






thank you guys :wink:

 

[BL4K3Y]

It looks like a Corona V2 (4GB) with POST_OUT.

The 250GB HDD was probably installed after the console left the factory.

 

[Titanfreak736]

its a corona v2 needs a sd nand reader because of 4gb nand it was probably upgraded with a 250gig hdd later on but yea dont ask about chips that arent tx its looks like a great chip but people here will say its sh*t which i understand because they want you to buy there stuff head over teamx360.co.uk for support on these chips

 

[rghpro]

If this unit is not already RGH'd, you can confirm if it was a 4GB by checking the storage settings.

1. Remove the HDD.
2. Turn on the console and remove all USB drives from it.
- if you see profiles, straight up its a 4GB.
- if it loads up empty, go to the settings/storage and check the devices, if you see no devices it was an original 250GB, if you see a device it was originally a 4GB.

I've RGH'd quiet a few of these and even the 4GB nands can be read via nand-x, its good to try before ordering a SD kit, if you have the nand-x already.