I pulled off the Standby_Clk resister...

[spatimouth]

so I used a spare quick solder kit, clipped off the long part that has a resister and soldered it onto the board. Worked like a charm! Thanks Team Xecuter!!

 

[Utmad]

nice bit of enginuity (not sure of spelling fo rthat word)

 

[x360ccm]

so you pull of the resistor and replaced it with the one from the qsb.

you should think about gettin a 33 ohm resistor.

 

[Martin C]

Yep, the 'resistor' on the QSB is in fact just a bridge.

 

[xbox360 hacker]

If you used the resistor from the qsb that is just the same as bridging the solder points as the resistor is 0 ohm best to use a 33 ohm resistor as it has those properties for a reason.

Edit: Martin just beat me to it shows am slow at typing pmsl

 

[x360ccm]

you can get 0603 smd 33 ohm or 0805 smd 33 ohm resistors.

 

[spatimouth]

Would there be any huge problems if I kept it that way?

---------- Post added at 10:33 ---------- Previous post was at 10:31 ----------

On second thought, I did try to jump the connection with a normal wire and that didn't work. So as a last resort before ordering a replacement resister, I snipped off the part from the quick solder kit. So... I not sure it's just jumped.

---------- Post added at 10:39 ---------- Previous post was at 10:33 ----------

would this one work?

http://www.radioshack.com/product/index.jsp?productId=2062312&CAWELAID=107599018

 

[Martin C]

It would but a normal resistor is huge compared to an SMD. You have a risk of pulling the pad off the board.

 

[x360ccm]

yeah that would be ok to use.

or you could get these 120823881206 or 110788561341

but i think shipping would take a while.

 

[staplerz]

I used a 33 ohm 1/2w resistor on my Falcon and now have rrod 0223 with no video/audio. I still haven't figured it out.

 

[x360ccm]

i order these 120823881206 or 110788561341on the 19 of jan,and they showed up yesterday.

so the wait wasnt that long..

---------- Post added at 10:21 ---------- Previous post was at 10:20 ----------

I used a 33 ohm 1/2w resistor on my Falcon and now have rrod 0223 with no video/audio. I still haven't figured it out.

maybe you should start your own thread with your issue.

post pics of your install nice clear pics.:rolleyes2:

 

[DayvG]

i order these 120823881206 or 110788561341on the 19 of jan,and they showed up yesterday.

I ordered some LED's and Resistors from this guy on New Years Eve and they still haven't arrived! You must be special buddy!