i put the wrong bios on my x3

[poipoi]

ok
i,ll prob get hammer but i need help
i had a lot of problems putting the x3 chip in but i got there in the end
1,6v and i use the rebuild
had the 3.3v light problem (not on) resolder a few time used packing to support the chip and i got it to work lol
the problem is i put the wrong bois on its the 2913 v16 plus
i know i can back up but i woz think how do i go about putting the right bios on
the switchs r on on off off off is that right and can i just reflash with the right bios
on the setting above^
its the first time i try a mod and i have read a lot but i do not undstand the crack about the switchs
thxs for any help
poipoi

 

[commodorex000]

when you boot hold the power and eject buttons together for a few seconds. It will automaticly boot to the backup bios which should be flashbios 3.0.1. Im assuming you are not getting to x3 config live right?

That will let you reflash your bios to whatever you want.

 

[CoHPhasor]

Here's a tip, since I think it's better to be safe than sorry.

You can boot your Xbox with ONE switch setting, and BEFORE you select your flash style you can select a DIFFERENT bank.

So, boot to X3 Config Live, FIND the flash method you want, THEN BEFORE you select it, place the new bios in the SECOND bank. (Off On Off Off Off)
This way, in case you screw it up you can turn the switch back to On On Off Off Off and still be able to use X3CL.

 

[u170who]

Your the sh*t Cohphasor. i put it into the second bank and hit the power and eject and *BOOM* flashbios backup. I am about to run down the Belt pkwy butt necked with joy!!!