I think I messed it up!

[pbgamer2]

The power went off have way through flashing. I have tried on on off off off . off on off off off. off off off off off. It al reads the same message (got bios over 1048576 bytes, unkown flash halting. I tried via internet , 303, and 1959, 3029. All get the same results. I made a dvd with 303 and flashed that way. Got the same results. I am out of things to try. Anybody out ther had this problem before I could sure use the help!

 

[nartac]

let me try to understand what you wrote: you were flashing half way until your power went out. You are trying to reflash to various banks but it won't flash and keeps giving you the unknown flash halting am I correct? Please tell me what version of xbox you have and are you able to get backup flashbios on when press power and eject buttons at the same time. Also tell me if you have home network or a crossover cable available.

 

[pbgamer2]

I have a 1.4 xbox, an x3 chip, tried to flash though a router hooked to my computer. By the way I flashed another xbox this way. I think the power outage did something to the chip. I figure it might of overflashed or something now that nothing will flash?

 

[nartac]

when pressed both power and eject buttons, are you able to get to flashbios? Make sure flash protection is disabled on both the chip and your x3 cp switch. Flash via http. If that didn't work, try removing the cable from the x3 to the X3 cp switch.

 

[pbgamer2]

yes, it will go into the flash bios option.but when go into any option,flash http or flash from dvd, anything is when it says got bios over http. 1048576 bytes unkown flash halting.