Ignoring Partition Tables

[wabidwoveren]

Currently I have 3 hard drives in my xbox, A, B, C. Hard drives A/B have f/g partitions, and C my newest drive i formatted with xbpartition and 32k clusters to have ONLY an F drive. I did this on an x2 with ind bios.

Now I have data on the hard drive and I can not disable "ignore partition tables" The only place this option exists is under new drive, and I dont need it on a new drive, I need it on a current drive. (Edit: all 3 drives have on drive partition tables, ready to be used)

First I set the bios to f/g and boot to drive C. Then I boot xbpartition and rewrite the partition table to be all F. Upon reboot the x3 has reset the partition table to f/g.

Currently there are 3 options
-Standard
-F to 137 G rest
-F ALL

Is there anyway to disable these all, and go ONLY off the hard drive? If not can I request this for a future release?

 

[ddails29]

Hitachi 59DJ - Flash ixtreme 1.51

I'm new on the forum, but not new to modding xbox's. I've done all the other dirves and Jtaging several times. So I know what I am doing, most of the time.

I have never flashed an Hitachi drive before and for the life of me I can't get it to work. I've tried loads of guides and youtube, but where it fails on mine they don't seem to have a problem.

I'm running 32bit Windows 7, I have my drive connected up to my PC with the CK3 pro power adapter and I am using jungle flasher.

I have installed the CK3 usb drivers but I still get the no comports found message when the program starts.

I open the tray and click send mode B in jungle flaher and it then appears in the Hitachi Tab. I am able to dump the drive ok. And I loaded in the correct firmware and spoofed the DVD key. (Although not sure what I did that time as now I can't seem to get it to dump)

So I go back to the Hitachi tab and select Flash iXtreme, and I always get this message.


Flashing Hacked f/w to Hitachi 0058/0059 by Ram Upload Method via WIN32 API
UnLocked!
Dumping Flash:.Ram Upload - Upload Failed


I'm gueesing it is not in mode B properly, but I am not sure what I am doing wrong. Any help would be greatly appreicated.

Thanks