TEST ihas 124 b
- Thread starter deathwarrior
- Start date
GeekHeat
VIP Member
Do u have burnermax firmware on the drive already. If so, then why wud u want to return it to stock firmware.
I think that i done something wrong because,i can only set speed 2.4x on RICOHPDJ-09.Is there a any fix?
GeekHeat
VIP Member
You are going to need 2.4 speed on them cheap discs anyway. Stick with verbatims as they are the best quality and the only discs supported here.
ultimate360
VIP Member
Agreed, I have yet to burn a bad verbatim disk. Usually burn them at 4x, but slower never hurts
Yes I know that Verbatim's are the best but is not dangerous to burn at 4x?I mean it can be bad burn.Do i need to set OPC when on 4x?
GeekHeat
VIP Member
I agree. Most people burn at 2.4 speed cos they are using sh*tty cheap discs.Iburn all my verbatims (singapore) @ 4x and have never had a bad burn
I see.But if I wanted to write verbatim's disc's on 2.4x speed,how to do that?But if check the box "OPC Before Write" on 4x it will give me a good burn?
Last edited:
nofeloniesyet
VIP Member
everybodys setup is diff man.lots of diff options and variables.you just have to read up on some threads,and try diff things you see and diff combos of things.it took me bout 50 coasters to finally dial mine in,and np every since.
GeekHeat
VIP Member
if u get verbatim mkm003 discs then u can burn them at 4x speed without any problems. Burning them at 2.4x doesn't always give u better burns I have found.