Ijust get PPPPPP's when httping

[elivt]

well I have searched the forum and cant find anything about this. I boot with chip on and go to enable network flashing and it gives me my DHCP Ip. from there I went to internet explorer and type it in. I browse for my bios.bin file (bios 1957) and hit enter. on the screen I just get a slow forming line of ppppp's then explorer says it has failed to connect.please help and thanks.

 

[alan12]

Jungle Flasher Not Seeing Hitachi 78 Drive

hi all i have looked at the tutorials to flash the hitachi 78 drive and i having one problem i can ge tjungle flasher to see the drive at all

i connected my sata cable to hitachi drive waited for wwindows to load and turned the xbox on cant see it the drive doesnt even come up as a letter and i tried refreshing many times

soo.

not sure if i was supposed to do this but i put the drive in mode b with my slax cd now i can see the drive as a letter in windows and in jungle flasher but on the left hand side where is says send mode b there is no drive info there... so im stuck i have no clue what im doing wrong.... now on the left mode b side there is a drop down you can change with numbers like 0078X or what ever and i tried all and nothing pops up
can any one help me out please let me know if u need more info


so basicaly and after i get it in mode b i do see the drive in the right with letter G: but it will not show up on the left in the mode b section is this ok can i still continue or does that mode b info on the left need to be populated?

 

[manolodes]

Re: Jungle Flasher Not Seeing Hitachi 78 Drive

there are two ways to flash hitachi in jungleflasher
1, winapi mode this is usually used for onboard sata,when the drive is in mode b it will be assigned a drive letter by windows and after a refresh will appear in the drive drop down menu at the right ,it will not appear under port properties.
2,portio for hitachi,this is usually for via cards that have had their drivers removed and showing a status 39.this will never be assigned a drive letter,and not appear in the drive drop down menu but will appear under drive properties on the left,however it some cases might not show at all ,but as long as the drive responds to the mode b command as done in the running jf log it can be dumped.