Im new so kill me for not knowing coolrunner rev c qsb, jr programmer v2

[zares]

Im installing qsb's on a jasper motherboard to rgh it.

I have coolrunner rev c

jr programmer v2

qsb set for phats, and all the wires.

Installing the qsb by the hdmi, things went wrong! Seems like ive destroyed this qsb, the xbox still working after removing it. The best I got from it was jrunner gave me this code.

Flash Config: 0x00000000
Can not Continue

The other two qsb sets are installed and seems to be working fine. So my question is is there a way I can use the other 2 qsb's and use direct wiring for the one by the hdmi?

If so can someone please direct me to a guide that can help me install the best fit for my xbox
(rjtag, rgh1 rgh2)

I know some of you will bash me say go look the forums, but honestly im confused no one has any help on jr programmer and coolrunner pro.

If there is an easier way of installing cool runner without the qsbs, because the qsbs seem to be the problem for me im better at direct soldering.

Is there a way I can use my jr programmer wires to directly solder it to the mother board and read dump the nand that way then install my coolrunner pro.

I wont give uP! I have 5 xbox's to break if I must to learn how to do this. thank you.

 

[john mathews]

flash config error usually is bad soldering u need to fillout template for help with pics of coolrunner and jr log http://team-xecuter.com/forums/showthread.php?96474-TEMPLATE-RGH-JTAG-help and have u programmed your jrp v2 and jrunner has a pic of where u install the wires at in images

 

[zares]

I know the problem is the qsb set by the hdmi chip, its no good i did a horrible job trying to solder it. Im asking is there away to directly hook up jr programmer with wires to my xbox if so do you have pics or a video?

 

[john mathews]

I know the problem is the qsb set by the hdmi chip, its no good i did a horrible job trying to solder it. Im asking is there away to directly hook up jr programmer with wires to my xbox if so do you have pics or a video?

I link u to where n how to do a wire install its in jrunner / nandx x points are the same for jrp v1 v2

 

[zares]

I dont see a link, and can you also give me a link for cool runne rev c thank you so much ive been so lost.

 

[john mathews]

http://team-xecuter.com/forums/showthread.php?86539-Xecuter-CoolRunner-Rev-C-Phat-Wire-Install-Guide

 

[zares]

my cool runner did not come with adouble shielded cord, and do you have the jr programmer link. I cant search forums it keeps saying refresh browser

 

[john mathews]

everything is listed in forum,jrunner and google /where not here to hold your hand!

 

[zares]

Im not asking to have my hand held, and im thankful for your help, Ive been reading the threads for 2 weeks I just need quick for how to install the jr programmer, without qsb set, I know its annoying to some but these things are not readily available since most people use the qsbs. I see the picture above, my question is can I just install the wires thats suppose to plug into the qsb by the hdmi? Or do I have to desolder the other 2 qsbs and install it all dont by wire.

The picture is helpful im looking for a guide I justdont want to mess up another xbox thank you sir.

 

[john mathews]

Im not asking to have my hand held, and im thankful for your help, Ive been reading the threads for 2 weeks I just need quick for how to install the jr programmer, without qsb set, I know its annoying to some but these things are not readily available since most people use the qsbs. I see the picture above, my question is can I just install the wires thats suppose to plug into the qsb by the hdmi? Or do I have to desolder the other 2 qsbs and install it all dont by wire.

The picture is helpful im looking for a guide I justdont want to mess up another xbox thank you sir.

I don't recommend u removing the qsb / but be careful because u can lift pads and traces

 

[zares]

Thank you sir the green and blue wire picture is so perfect your a life saveate to be a bg I see your in il im in oak lawn il lol but the double shielded cord is throwing me off, can i still install my cool runner?

 

[nofeloniesyet]

Thank you sir the green and blue wire picture is so perfect your a life saveate to be a bg I see your in il im in oak lawn il lol but the double shielded cord is throwing me off, can i still install my cool runner?

you dont need a double sheilded cable,in fact most of us here dont recommend it at all.

 

[zares]

Version: 00
Wrong Version.

Aftwe i solder in the blue and green wires which this now comes up?

 

[john mathews]

did u remove the qsb ? if so we need pics now of the area that the qsb's where removed

 

[Mikaz]

Need help? Fill template and add photos of install and your coolrunner. Thats a simple rule if you need help.

 

[zares]

no
I did not remove qsb, I will provide photos now im uploading them.

- - - Updated - - -

this is not a coolrunner problem its a jr programmer problem.

 

[zares]

Flash Config: 0x00000010
IoTimedOut


IoTimedOut:No more bytes!
00000010


after resolding the wires.

 

[zares]

the people who sell this stuff dont care!

No tutorials, every forum I go on i get cursed out, like wth I bought a product with no instructions none at all! No one will help!

 

[keil423]

Re: the people who sell this stuff dont care!

Hey pal I'm sorry but if you can't find a tutorial here then you either aren't looking or don't know how to navigate a forums. If you have a tx product the guide for it is right here on this site.

Or you can google it.

People get scolded when saying something dumb like "I've been looking for two weeks but can't find a guide to read my NAND anywhere" because that very thing is said 5000 times a month. How can anyone not find the guide?

Do this. Google "slim jrprogrammer wire install" you should see images of it first and the first link is to the install guide right here on tx.

That's why you get cussed out. Your feeding us bull sh*t while asking us to do your research for you. Use your damn head. That goes for any other idiot who finds this thread while searching for two weeks for a guide.

 

[keil423]

Re: the people who sell this stuff dont care!

Further more in the previous thread you have you were instructed to fill out the template and provide pictures of your install. You said you were in the process of uploading but never posted pictures. That's like refusing to accept the help your asking for.
Btw you haven't spoken to a single person who makes these products.