I'm working on something sweet (need help)

[mixxx]

i took the Roto Zip (plunge bit on the dremel) and carved out flames on the xbox cover (top of case)

then i had a spare power/eject mobo that i burned out ..i took the leds off that

so i have the three colors...

i found that the leds had three prongs

the center is the " - " and the two outers are the "+" one being green and the other being red... so here's what i want to do ...

i want to hook the green side into one of the leds on the x3 control pannel .. or maybe to just the power button led ...

then hook the red side to the HDD led .. that way when the xbox thinks the flames flicker ...

my questions .. hooking these leds into leds with other uses.. is that going to hurt anything .. since the leds must share a common negative?

 

[D34TH_R3C0N]

If you had 50 different things hooked up to the same ground(-) and they all did different things that wouldnt affect it in the least... just make sure the positives are hooked up right. If i remember right you could just hook the ground to the metal shielding or something else that didnt carry a positive current.