X360USB PRO Instalation

ByteBit

VIP Member
Nov 7, 2004
197
23
UK
Hi all
Right, my usb pro v1 has decided not to play with my new lappy!! GGrrrrrrr
win 7 home prem 64bit fresh install, all drivers redownloaded, i have plugged usb pro into lappy, I don't
get any " installing drivers" stuff, as in this thread,
http://team-xecuter.com/forums/showthread.php?t=62598
No usb2sata bridge, mass storage device or usb hub.
have had to manually install drivers, i now have libusb-win32 devices showing in dev manager.
Have tried usb pro firmware updater (bootloader mode, only to test if device is presant) Nothing, jf does not see
it also.


Help

cheers
Byte :mad2:
 
Last edited:

BL4K3Y

VIP Member
Jul 7, 2010
12,827
118
Colne, Lancashire (UK)
Have you tried with the AUX power cable connected?

When the device is in bootloader mode (update switch ON), do you notice any chances in the update tool at all (post a screen shot if you are in doubt)?
 

ByteBit

VIP Member
Nov 7, 2004
197
23
UK
Have you tried with the AUX power cable connected?

When the device is in bootloader mode (update switch ON), do you notice any chances in the update tool at all (post a screen shot if you are in doubt)?
No don't have aux cable in, (will try it)
No change in update tool
No ******* symbol in jf
In jf i don't get usb i/o in mtk flash tab

Byte
 
Last edited:

ByteBit

VIP Member
Nov 7, 2004
197
23
UK
Don't you know it, bloody want something and
someone has , "tieded up" T**t
Wat voltage is the aux input?
5v same as the other usb cable?
got an old Ipoo usb lead, will chop end
off and solder up a plug to fit.

ummm have just tried on old desktop and still same
3 different usb cales,
with switch set to on (bootloader position)
leds, LD1 on (green) LD6 on (red)
switch set to off (normal mode)
leds, LD1 on (green) LD2 on (red) LD5 on (green)
when reset is pressed and held (10 secs) LD6 has very tiny red spot lit
can't get anything else out of it :(

looks like i need a new one :( if it's the case, i'll get the usb pro v2
as i don't see the point of buying the older one now.
oh poooooooooooo :(


cheers n waiting
Byte
 
Last edited:

ByteBit

VIP Member
Nov 7, 2004
197
23
UK
Guys looks like right hand side pin in mini usb conector
has snapped/colapsed.
does this pin carry power into usbpro?
have ordered smd mini usb conector,
going to remove old conector and do a
hardwire until replacement arrives.
cheers all
Byte