Installed but flashes green

[cbovis]

Hey guys,

I've installed the X3 using the pin header however when I turn on the box flashs green then turns off, flashes green then turns off and then turns on and flashes green/red. This is on the power switch.

I've checked my solder which seems to be fine. If I hold to disable the chip it works fine.

Any ideas?

 

[parkers]

thats called a frag, its a pain in the ass, this is all i can help, o ya and check ur soldering and try squeezing the chip the the pin.

 

[Vyrus]

Removed

 

[Jorde907]

can anyone repair my xbox it does that 3 frags and then nothing does it with and without the chip.I've resoldered it a couple times the only thing i can think of is a broken trace but i cant find any and everthing tests well with a multimeter. Any suggestions

 

[Vyrus]

Removed

 

[Cheb41]

Resolder, never assume that your solder points are good, resoldering a couple of time might not be good enough. If the solder points were fine then it would work right! Try pins 9 and 13 (3.3v) these are the ones I had trouble with.