LITEON 83850 v1 installing new replacement drive, key not found

I

ill800

Noob Account
Apr 14, 2012
8
0
to make a long story short, after the last spring update last year where ms moved the key and flashed to 0225, i went to reflash my drive as i made the mistake of updating before going back to stock. when i was doing this i accidentally fried my drive (power cord backwards). my computer got a virus on it and i lost my stock firmware/key.

a friend of mine managed to retrieve my cfw from the chip off the pcb board. i rebuilt the key in jf with that barcode technique. got my replacement drive, lite on erase, spoofed key to lt3.0 for 83c and write. flashed and outroed fine. recognizes drive and firmware but the dvd key is not found. the drive itself just wants to stay ejected and the xbox power button on the front just blinks

cant figure out what im doing wrong.
 
O

onedumblonde

VIP Member
Jan 31, 2011
264
0
Canadia
Why don't you try flashing it with just the stock 0225 firmware and see what happens.
Can you post your jf log from any of this?

Edit: 0251 fw for the phat liteon not 0225

Sent while driving dangerously using Tapatalk
 
Last edited:
dragontm

dragontm

VIP Member
Oct 25, 2009
898
0
kent uk
also what equipment are you using?, but the best thing to post is the JF log as stated by AMIT
 
Oggy

Oggy

Staff member
Troll Eating Dogs
Mar 1, 2010
3,346
128
DVD Key: Not Found is perfectly normal for an 02510c drive.

The issues you're experiencing.....

How did you power the drive when you blew it ?

---------- Post added at 13:08 ---------- Previous post was at 13:07 ----------

JF Log is pretty redundant tbh, it reinquires fine, so it wrote fw fine.
 
I

ill800

Noob Account
Apr 14, 2012
8
0
thx for all the quick responses. ill post the log asap, the computer with all my xbox crap is in a room where someone is sleeping.

anyhow i have not tried flashing with stock firmware. just with what i had in my jf firmware pack. i didnt see stock for 83c

the original drive i had was fried by me plugging in the power cord into to the mb backwards. the cfw that was retrieved from that drive was definitely the flashed firmware (0225). but that wouldnt have anything to do with the key would it?

in theory all i needed to do was get my original key, spoof it to a new drive (which is another 83450c v1) and load up target firmware for it then flash it.

btw im not using any tools, hence the 83cv1 drive

the process seemed to work according to the logs, but i could be wrong. like i said will post logs asap.
 
Oggy

Oggy

Staff member
Troll Eating Dogs
Mar 1, 2010
3,346
128
^ That too.
 
I

ill800

Noob Account
Apr 14, 2012
8
0
JungleFlasher 0.1.92 Beta (304)

Session Started Sat Apr 14 10:20:40 2012



This is a 32 bit process running on a 32 bit CPU

portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

Found 4 I/O Ports.

Found 1 Com Ports.

Found 5 windows drives A: C: D: E: F:

Found 1 CD/DVD drives E:





Sending Lite-On-Erase request to port 0xCC60

..............

Drive returned Status 0xD0

..

Serial flash found with Status 0x72

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

Loading firmware file C:\Users\800\Desktop\dummy_fixed.bin

MD5 hash: c9e31b7b438c17c206f930026b88df11

Drive key @ n/a 0E1DE7060B8CC086C10A8A127F3A3860

Firmware Osig: [PLDS DG-16D2S 8385]

Firmware is: Stock

Loading firmware file C:\Users\800\Desktop\JungleFlasher v0.1.92 Beta (304)\firmware\LTPlus-0251-v3.0.bin

MD5 hash: d14fe82b96741b7a18e5c1e7adbf0a98

Genuine LT plus v3.0

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: LT-Plus 3.0

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target



Target rev is LT 02510C, serial info not copied



Getting Status from port 0xCC60

SPi flash found with Status 0x72



Sending Chip Erase to Port 0xCC60

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !



Sending Vendor Outro to port 0xCC60

Drive is Lite-On..
Click to expand...
there ya go
 
axee44

axee44

VIP Member
Nov 8, 2011
330
48
York,UK
Flash it with stock 02510c firmware and check if problem persist.
 
I

ill800

Noob Account
Apr 14, 2012
8
0
flashed with stock 02510c, same problem

JungleFlasher 0.1.92 Beta (304)

Session Started Sat Apr 14 14:53:40 2012



This is a 32 bit process running on a 32 bit CPU

portio32.sys Driver Installed

portio32.sys Driver Started, thanks Schtrom !

Found 4 I/O Ports.

Found 1 Com Ports.

Found 5 windows drives A: C: D: E: F:

Found 1 CD/DVD drives E:



Loading firmware file C:\Users\800\Desktop\dummy_fixed.bin

MD5 hash: c9e31b7b438c17c206f930026b88df11

Drive key @ n/a 0E1DE7060B8CC086C10A8A127F3A3860

Firmware Osig: [PLDS DG-16D2S 8385]

Firmware is: Stock

Loading firmware file C:\Users\800\Desktop\Liteon_0251C-OFW.bin

MD5 hash: e7e0f802769fd80329784ca4b512f1a9

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D2S 0251]

Firmware is: Stock

Spoofing Target

DVD Key copied to target

Target is LT - ID strings not copied to Target



Target rev is LT 02510C, serial info not copied



Sending Lite-On-Erase request to port 0xCC60

..............

Drive returned Status 0x0

.....

Serial flash found with Status 0x72

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes



Getting Status from port 0xCC60

SPi flash found with Status 0x72



Sending Chip Erase to Port 0xCC60

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................



Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !



Sending Vendor Outro to port 0xCC60

Drive is Lite-On..
Click to expand...
not sure which dash # im on but i updated last years spring update that moved the key and flashed drives to 0225. thats where the problem all started. i burned up my drive reflashing it from the spring update
 
hilly360

hilly360

VIP Member
Dec 17, 2011
226
33
DURHAM, North East. UK
maybe try flashing it to stock 83c like u say.

i think it maybe sumit to do with the dashboard update. u may need correct fw for correct dash. possible dash 13146 or before.

once you get it booting fine as it should then update to latest dash via usb stick then flash to lt+3.0.

and the new stock firmware is 0251c
 
Last edited:
I

ill800

Noob Account
Apr 14, 2012
8
0
tried flashing to stock 83c. same problem. cant update the dash either. gives me error code 335a 351f 1600 0703 c000 0099
 
U

unleashed1982

VIP Member
Jan 27, 2012
254
0
Manchester (UK)
ill800 said:
tried flashing to stock 83c. same problem. cant update the dash either. gives me error code 335a 351f 1600 0703 c000 0099
Click to expand...
Are you updating the dash with custom firmware on the drive? if so flash back to stock before doing the update

Also try using dash 13599, because 351f coverts to 13599 in hex, so thats the dash the xbox is looking for
 
Last edited:
I

ill800

Noob Account
Apr 14, 2012
8
0
the drive is blank. its a replacement drive probably a refurb. i dont have a working drive. im on the kinect dashboard. the new drive doesnt read disks just says opening all the time and wants to eject. power button blinks
 
Oggy

Oggy

Staff member
Troll Eating Dogs
Mar 1, 2010
3,346
128
OggyUK said:
DVD Key: Not Found is perfectly normal for an 02510c drive.

The issues you're experiencing.....

How did you power the drive when you blew it ?

---------- Post added at 13:08 ---------- Previous post was at 13:07 ----------

JF Log is pretty redundant tbh, it reinquires fine, so it wrote fw fine.
Click to expand...
Ignored, so I'll continue to ignore you.

Keep believing its a fw issue.

:rolleyes2:
 
  • Like
Reactions: Justice1231
I

ill800

Noob Account
Apr 14, 2012
8
0
OggyUK said:
Ignored, so I'll continue to ignore you.

Keep believing its a fw issue.

:rolleyes2:
Click to expand...
im not ignoring you nor am i believing its a fw issue. :rolleyes:

---------- Post added at 17:54 ---------- Previous post was at 17:52 ----------

i actually told you how i powered the drive...
 
Oggy

Oggy

Staff member
Troll Eating Dogs
Mar 1, 2010
3,346
128
Then what you need to do is identify the fault.

Do you have a random dvd drive for a 360 hanging around, plug it, in, does it doe the same?

If not, drive related, if it does, closer to home....

Change the cable, same? no, closer to home...
 
L2000

L2000

VIP Member
Mar 8, 2011
271
33
Cape Town
Try reflashing the drive in Dos using DosFlash 16,also are you sure that the rebuilt dummy file that you've built is 100% correct? The drive that you've got you said is a replacement or refurb,have you checked to see if someone hasn't tried and botched a Kamikaze hack on it? I have only seen this problem on failed kamikazes where the drive just says opening then closing but nothing happens and the center power led just flashes all the time
 
You must log in or register to reply here.