This is my first modding attempt since I tried a PS2 last year (I shocked the hell outta myself and eventually fried the motherboard after messing up 1 of the 43 connections), and I'm terrified of ruining another system. I installed the S.P. adapter just fine, and it works (all LEDs lite). Then I installed the 2.6CE to it. Whenever I boot, however, it is as though there is no modchip. How exactly do the modchip and adapter plug together (I think that may be the problem)? Also, do I need to power both the adapter and the modchip (I think that may be too much)? With the adapter, what exactly do I still need to plug in with the modchip? I'm sorry, but whenever they release these adapters they don't tell you how to use them very well. Thanks to anyone who can help me out!
Installing with S.P. adapter
- Thread starter pick2
- Start date
ok there are two spice adapter one has 12 pins and the other that has 18 and the 5v plug to get 5v power to the chip hope this helps
one more thing if you got a v1.0 to v1.5 xbox the spice is a waste of money you use just one part and put the rest in the bin there made for the v1.6 xbox
and only the v1.6 xbox unless you wont to waste you money
one more thing if you got a v1.0 to v1.5 xbox the spice is a waste of money you use just one part and put the rest in the bin there made for the v1.6 xbox
and only the v1.6 xbox unless you wont to waste you money
I have a v1.6 and this is the adapter I got:
http://www.xbox-modchips.com/xenium-sp-solderless-adapter.htmhttp://www.xbox-modchips.com/xenium-sp-solderless-adapter.htm
Thanks for trying to help. Any more ideas?
http://www.xbox-modchips.com/xenium-sp-solderless-adapter.htmhttp://www.xbox-modchips.com/xenium-sp-solderless-adapter.htm
Thanks for trying to help. Any more ideas?
http://www.xbox-chipz.co.uk/images/XodusSolderlessAdapterBig.jpg
should get red wire as well if you look at the white part you can see where the 5v go,s at the end of wire in pic
should get red wire as well if you look at the white part you can see where the 5v go,s at the end of wire in pic
Last edited:
the chip itself does not come with a X3 bios on it, you must put the latest bios on it, its their way of not getting into MS bad graces, you will not find the x3 bios posted on any of these websites it would result in getting ban, you need to learn to use xbins you will find it there, also make sure you use the correct X3 bios for your chip they are different and writen from different version of xboxes
Last edited:
It says that it comes with a Cromwell BIOS.
Here's the real question: How does the damn modchip attach to the adapter? I've tried every way and it seems like none of them are right. Some ways the box turns off, and the way I think is right just turns the box on normally. I honestly have no idea how to put the thing on!
Here's the real question: How does the damn modchip attach to the adapter? I've tried every way and it seems like none of them are right. Some ways the box turns off, and the way I think is right just turns the box on normally. I honestly have no idea how to put the thing on!
Please don't post the wrong information. His post says he has a 2.6, NOT an X3. The X3 bios will not work on a 2.6, and if he does flash with your suggested bios he will need a programmer courtesy of your bad information.tonyintn said:if you look at his 8th post he is trying to do everything with the stock Cromwell BIOS not going to work that way he needs to flash the X3
Oops my bad you are correct, I thought was in the X3 only forum did not notice it had the 2.6 and X3 mixedFantmx said:Please don't post the wrong information. His post says he has a 2.6, NOT an X3. The X3 bios will not work on a 2.6, and if he does flash with your suggested bios he will need a programmer courtesy of your bad information.
tonyintn
[font=verdana, arial, helvetica]
so read before posting
[/font]
[font=verdana, arial, helvetica]
here,s the post where does it say he got the chip working as i said he need the right spice to get it to workIt says that it comes with a Cromwell BIOS.
Here's the real question: How does the damn modchip attach to the adapter? I've tried every way and it seems like none of them are right. Some ways the box turns off, and the way I think is right just turns the box on normally. I honestly have no idea how to put the thing on!
so read before posting
[/font]
mrmodder888
Noob Account
- Feb 9, 2006
- 2
- 0
Sorry if I am missing something, but right under the pictures it says..
The XENIUM Solderless solution for ALL XBOX Versions ( v1.0 - v1.6B !! ) This adapter is very very advanced and is very easy to install. This Adapter ONLY WORKS with the XENIUM ICE chip.
Meaning you bought the wrong one. The one that work's is this one..
http://www.divineo.com/cgi-bin/div-us/dd-xb-univspadap
The XENIUM Solderless solution for ALL XBOX Versions ( v1.0 - v1.6B !! ) This adapter is very very advanced and is very easy to install. This Adapter ONLY WORKS with the XENIUM ICE chip.
Meaning you bought the wrong one. The one that work's is this one..
http://www.divineo.com/cgi-bin/div-us/dd-xb-univspadap