LITEON 74850 Invalid Drive Status

[jayc1977]

Hi Guys,

Ok I've got a liteon 74850c, I returned it to stock to update the dash. I erased the liteon and when I go to write I get invalid drive status, or on other attempts the firmware type isn't recognised. I'm using my laptop with via 6421 pc card with ck3 pro, ck3 probe 2 with probe 3 adapter cable. I have flashed this drive with this setup before so all keys stored and was successful. The drive doesn't eject, I can get into vendor mode with a 0x72 status but as soon as i try to write it gives me a status of 080. I have tried flashing to my previous lt 3.0 and my stock fw but no joy!!! Any suggestions?

I can't remove my via drivers as the pc card needs them to detect the drive.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Sat Jun 30 18:00:52 2012


This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 1 Com Ports.
Found 2 windows drives C: D:
Found 1 CD/DVD drives D:


Sending Vendor Intro to port 0xDF30
Status 0x80
Re-sending Vendor Intro:
..
Serial flash found with Status 0x72


Sending Device ID request to port 0xDF30
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Loading firmware file C:\Users\james\Xbox 360\My Liteon\Dummy.bin
MD5 hash: 9bb643d4e2f11cb37bd6410a48819a49
Inquiry string found
Identify string found
Drive key @ removed by author
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Loading firmware file C:\Users\james\Xbox 360\My Liteon\ofw.bin
MD5 hash: 10449d64ece896141baf0531ca7d8e03
Drive key @ n/a as aove
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: Stock
Spoofing Target
DVD Key already matches
Target is LT - ID strings not copied to Target
Serial data already matches


Target rev is LT 02510C, serial info not copied


Sending Lite-On-Erase request to port 0xDF30
..............
Drive returned Status 0x80
..........
Serial flash found with Status 0x72
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes


Getting Status from port 0xDF30
Invalid Status 0x80



All help appreciated.

J

 

[CrazY1985]

Did you try to intro/outro the drive ?


After that erase the drive again and continue the write

Maybe it helps....

 

[daman10]

Load the original firmware to the source then try to intro the drive again

 

[jayc1977]

Did you try to intro/outro the drive ?


After that erase the drive again and continue the write

Maybe it helps....

Hi,

Thanks, yes tried this numerous times but still same scenario. I can get into vendor mode with a 0x070 status but it wont write, gives a status of 0x80 or at times an unknown flash type write aborted, I am power cycling the drive via the probe 3 cable and ck3 pro but still wont write, I have tried different timings also...

---------- Post added at 22:44 ---------- Previous post was at 22:41 ----------

Load the original firmware to the source then try to intro the drive again

I have tried the dummy.bin and a few stock firmware, lt+ 3.0 also but it wont write as I replied above

---------- Post added at 22:45 ---------- Previous post was at 22:44 ----------

Here are some more JF logs...


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Sat Jun 30 18:46:21 2012


This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 4 I/O Ports.
Found 1 Com Ports.
Found 2 windows drives C: D:
Found 1 CD/DVD drives D:


Sending Vendor Intro to port 0xDF30
Status 0x80
Re-sending Vendor Intro:
...
Serial flash found with Status 0x72


Sending Device ID request to port 0xDF30
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Loading firmware file C:\Users\james\Xbox 360\My Liteon\Dummy.bin
MD5 hash: 9bb643d4e2f11cb37bd6410a48819a49
Inquiry string found
Identify string found
Drive key @ 0xA030 8D7306DD30F2B5670DF5CCE86BCD483E
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: PhatKey Extract
Loading firmware file C:\Users\james\Desktop\JungleFlasher v0.1.92 Beta (304)\firmware\Stock firmware\LiteOn (Phat)\LiteOn_Post_13141\orig-02510C-1c000.bin
MD5 hash: e7e0f802769fd80329784ca4b512f1a9
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D2S 0251]
Firmware is: Stock
Spoofing Target
DVD Key copied to target
Target is LT - ID strings not copied to Target
Serial data already matches


Target rev is LT 02510C, serial info not copied


Target f/w saved as: Lite_CFW stock1.bin


Getting Status from port 0xDF30
Invalid Status 0x80


Getting Status from port 0xDF30
Invalid Status 0x80
Sending Vendor Intro to port 0xDF30
Status 0x80
Re-sending Vendor Intro:
...
Serial flash found with Status 0x72


Sending Device ID request to port 0xDF30
Spi Status: 0x2A
Manufacturer ID: 0x2A
Device ID: 0x2A
Flash Name: Unknown type
Flash Size: n/a
Unknown flash type Write aborted !

 

[daman10]

I had same problem once thought the drive was gone and put it in a drawer until I bought a x360 USB pro then managed to revive it. More than likely it's because Ur using either a via card or onboard sata