FIXED Invalid status 0*50

[Simon Sudbury]

Hi

Am using usb pro ( original one-version 0.18 fw) with CK3i to flash 0251 Phat Lite-On with Lt 3.0. Have hooked everything up like always and get drive recognised (in XP) and then use firmware tool to inject dummy bin into LT3.0 etc. However, when I try and write I get this invalid status message. I've included the log below for info. I know this is fairly common but couldn't find a workaround for me.

I also note is that the port io indicator on usbpro is red is that right?

Also strange that I can't even get the drive recognised in Win 7?

Any advice would be much appreciated as doing this for my son! Thanks

JungleFlasher 0.1.94 Beta (320)


Session Started Mon Feb 18 10:04:21 2013






This is a 32 bit process running on 4 x 32 bit CPUs


X360USB PRO detected, Version 0.18






Found 1 I/O Ports.


Found 0 Com Ports.


Found 9 windows drives C: D: E: F: I: R: S: T: U:


Found 1 CD/DVD drives F:


Loading firmware file D:\xbox Progs\Dummy.bin


MD5 hash: 5bdc4010bd8f4a3cb5381ceb098bfad1


Inquiry string found


Identify string found


Drive key @ 0xA030 B5C976964E1698C1ED3ECE9292DF8AA4


Firmware Osig: [PLDS DG-16D2S 0251]


Firmware is: PhatKey Extract


Loading firmware file D:\xbox Progs\LTPlus-0251-v3.0.bin


MD5 hash: d14fe82b96741b7a18e5c1e7adbf0a98


Genuine LT plus v3.0


Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF


Firmware Osig: [PLDS DG-16D2S 0251]


Firmware is: LT-Plus 3.0


Spoofing Target


DVD Key copied to target


Target is LT - ID strings not copied to Target


Serial data already matches






Target rev is LT 02510C, serial info not copied




Getting Status from port 0x0000


Invalid Status 0x50




Getting Status from port 0x0000


Invalid Status 0x50

 

[Antalpromille]

did you try erasing it?

im missing this part:

Sending Lite-On-Erase request to port 0x0000
..............
Drive returned Status 0x80
......
Serial flash found with Status 0x72
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Getting Status from port 0x0000
SPi flash found with Status 0x72

 

[Martin C]

OP - what part of the JungleFlasher PDF have you gotten stuck on?

 

[Simon Sudbury]

Hi

Thanks for these responses. Gist is that I've only flashed Hitachi and Benqs before so not really used to Lite Ons. Already had LT2.0 when I bought box and now want to flash to LT 3.0. I know abut reverting to stock, update etc first but my son went on leve and now have new dash anyway.

I'm at the part after you've inserted dummy bin and spoofed into LT 3.0. Probably wrongly I thought you could just hit the write tab in MTK flash but I guess you have to do Lite On erase first. Is that right? If so, do I have to power drive on and off at some point in the process?

Look forward to hearing from you and many thanks

Simon

 

[Antalpromille]

Hi

Thanks for these responses. Gist is that I've only flashed Hitachi and Benqs before so not really used to Lite Ons. Already had LT2.0 when I bought box and now want to flash to LT 3.0. I know abut reverting to stock, update etc first but my son went on leve and now have new dash anyway.

I'm at the part after you've inserted dummy bin and spoofed into LT 3.0. Probably wrongly I thought you could just hit the write tab in MTK flash but I guess you have to do Lite On erase first. Is that right? If so, do I have to power drive on and off at some point in the process?

Look forward to hearing from you and many thanks

Simon

yes hit lite-on erase and follow the instructions (power cycle the drive) and it will intro, after that youre free to flash it. read the JF tutorial if you are unsure.

 

[petlar]

i see you have a ck3i just tick the box additional features and it will power cycle the drive for you.

 

[Martin C]

Yes, follow the JF PDF.

 

[Simon Sudbury]

Many thanks again.

Going to give it a go now.

 

[Simon Sudbury]

Sorry, just before I try, where and when will I find the additional features box to tick?

Thanks

 

[Martin C]

That only applies if you have a CK3i and have it connected via USB to your PC.

You don't need it. A manual off/on will do the same thing.

 

[petlar]

first page as soon as jungleflasher opens

 

[Simon Sudbury]

Many thanks again.

Will let you know how I get on:frown:

---------- Post added at 15:09 ---------- Previous post was at 15:00 ----------

Hi

Did erase but then said something about device 0*90 and then drive intro failed! I do have key but am worried that I may have bricked drive now and son will be very annoyed. I didn't get any sort of prompt to power cycle and it didn't so it automatically even though that additional features box was checked.

I've tried running JF again but it now doesn't recognise the drive!!

Any advice would be really appreciated.

 

[Martin C]

if you erased ok, just run vendor intro again and power cycle the drive. The SPI is empty, that's all. You're gonna write new firmware to it.

 

[Antalpromille]

Do as martin said. I dont think theres is a way to brick these lite-ons by software, never heard of it

 

[Martin C]

Nope, impossible to brick a lite-on with software.

 

[Simon Sudbury]

Hi again

Did the vendor intro again, power cycled and wrote and halleluja, it worked!!!

I'm really grateful to everyone for the constructive and clear advice. Just a bit weird when it saaid outro failed or whatever it was. Other funny thing was that the power cycle thing didn't run automatically even with CK3i-must have been the way I had it hooked up.

Anyway I learned a bit and will know what to do next time.

Many thanks again

Simon