RGH is it ok to continue

[andyxbox]

dump of my nand error


C:\nandpro3>nandpro usb: -r16 nanddump.bin
NandPro v3.0a by Tiros

Looking for usb interface device
Can not continue

C:\nandpro3>nandpro usb: -r16 nanddump.bin
NandPro v3.0a by Tiros

Looking for usb interface device
Flash Config: 0x00023010
Block Size: 16KB Block Limits: 0x000000..0x0003FF
File: nanddump.bin
Reading
Error: 250 reading block 142
03FF

C:\nandpro3>nandpro usb: -r16 nanddump2.bin
NandPro v3.0a by Tiros

Looking for usb interface device
Flash Config: 0x00023010
Block Size: 16KB Block Limits: 0x000000..0x0003FF
File: nanddump2.bin
Reading
Error: 250 reading block 142
03FF

C:\nandpro3>fc /b nanddunmp.bin nanddump2.bin
FC: cannot open NANDDUNMP.BIN - No such file or folder


C:\nandpro3>fc /b nanddump.bin nanddump2.bin
Comparing files nanddump.bin and NANDDUMP2.BIN
FC: no differences encountered

 

[Martin C]

What guide are you following?

If you use xNANDHealer it'll do all the checking for you.

 

[legitmod]

just use Nand Healer GUI v0.74 to compare them just make sure there named nand1 nand2 nand3 nand4 an XNand Healer GUI app is in your nandpro folder

 

[andyxbox]

the guide im using is http://www.team-xecuter.com/forums/showthread.php?t=76193
but will try nand healer

 

[Martin C]

OK - I don't understand the point of this thread then. If you're following that guide, what's the problem here?

 

[WHiiT3-BoY]

Check over you soldering and make sure you use FLUX

 

[Martin C]

Check over you soldering and make sure you use FLUX

Pray tell what this will resolve?

 

[paul.86]

As a good old search will show your bad block is after 4f so raw flash will take care of it and another search would show error 250 is empty block so you could erase if ya want

Whiit3 just getting your post count up doesn't make you VIP your posts will be checked

Sent from my HTC Vision using Tapatalk

 

[Martin C]

As a good old search will show your bad block is after 4f so raw flash will take care of it and another search would show error 250 is empty block so you could erase if ya want

Sent from my HTC Vision using Tapatalk

How many times......

:facepalm:

Warning

DO NOT MESS WITH YOUR ORIGINAL NAND.

erasing blocks on your original dump will confuse most tools as they no longer see it as bad, only empty (ecc data is erased).