ANSWERED Is it possible to extract KV without Cpu Key ?

[PureVVater]

Hey, I was wondering if it was possible to extract the key vault from the nand.bin without the cpu key. I want to extract the key vault from a falcon, but that has been updated (not jtagable). So I wouldn't be able to write and load Xell. Is there any other way of getting the cpu key or extract kv.bin without cpu key ? Thank you.

P.s. Thanks guys for solder sucker method. Went out to buy one for 10$ and it worked right away. I soldered the pin headers beautifully with flux , but then when I read the nand, I only got errors. I was like what the f***, so I assumed it was my soldering De-soldered some points and re-soldered them. Tested it, still only had errors ( bad blocks, couldn't read). So I checked the pin header cable and it didn't look fully in the nand-x, but it felt like it went all the way in. I decided to push it in more and then it fit in perfectly and the nand also read perfectly. So it wasn't my soldering after all
If your wondering where this came from : http://team-xecuter.com/forums/showthread.php?t=55957
THANK YOU STEVEN007, FLASHING360, AND OF COURSE TEAM EXECUTER

 

[manwithoutname]

You can extract the KV from any NAND dump but it will be encrypted so it will be of no use.

 

[M AzeeM K]

You can extract the KV from any NAND dump but it will be encrypted so it will be of no use.

Yeah, exactly as manwithoutname says.

 

[TAR]

And u need the CPU key to decrypt the kv, without it it's useless.

 

[PureVVater]

So there's no other way ?

 

[marshamods]

no way, and never will be a way.

 

[BGAMods]

if there was a way to decrypt kv without the cpu key then itd mean that an 9199 dash could have the dvd key recovered.

impossible.

 

[PureVVater]

Thanks everyone for your help