RGH is my X360 dead ??

[x360ccm]

spaghetti junction that looks like.

can you not move the wires out the way and take a close up.plus the underside of the mobo to.

it be in your benefit:tongue:

 

[gonkar]

and I get RROD after around 25 second

 

[Krafter]

Hmm... Did you update at anytime during this process?

5s- issue with CPU_RST/CPU_PLL_BYPASS
15s - LDV
30s - GPU issue.

 

[gonkar]

I did not update any thing , just installed CR and wrote .ecc file , and that's what I got no Glitch no xell no video, I wrote my stock nand back then now RROD. that's all my story

 

[Krafter]

And you are using the -w and not the +w when writing your original nand back? Are you using a nand-x or a parallel flash cable?

edit: i just noticed your pick of the nandpro command prompt. It looks like you are using USB.

 

[gonkar]

I am using Nand X and Jtag tool , and I tried NandPro -w

 

[Krafter]

OK, then I again suggest that you take close up pics of the PLL_BYPASS and the CPU_RST points on the bottom of the board.

 

[gonkar]

ok I will do it then I will upload them for you.
Thank you for your support

 

[gonkar]

ok here is the image of PLL_BYPASS

---------- Post added at 02:40 ---------- Previous post was at 02:35 ----------

ok and here is CPU_RST

 

[gonkar]

so what's the soluation now ?

 

[Martin C]

you have FAR too much exposed wire on CPU_PLL_BYPASS. Check my sticky entitled 'pics'.

 

[gonkar]

I did as you told me now Martin and nothing happen.

 

[gonkar]

somehelp please

 

[gonkar]

someoone help me please

 

[gonkar]

someoone help me please

 

[noobnotforlong]

Calm down you'll only get an infraction for bumping rules say don't be doin it

Have you tried removing your green wire CPU_pll turning cr to org and flash orig nand
If that works snip the wire down a little so there's less exposed and start the process again



Sent from my HTC Desire Z using Tapatalk

 

[Martin C]

Calm down you'll only get an infraction for bumping rules say don't be doin it

Too late - infraction given.

 

[Krafter]

It's a shame that he had to be so impatient and payed the price. It looks to me as he buggered up the resistors around the PLL_BYPASS and one might even be missing.

 

[gonkar2]

Calm down you'll only get an infraction for bumping rules say don't be doin it

Have you tried removing your green wire CPU_pll turning cr to org and flash orig nand
If that works snip the wire down a little so there's less exposed and start the process again



Sent from my HTC Desire Z using Tapatalk

No it does not work. I did as you said.

 

[gonkar]

I installed new CoolRunner and used another NAND-X, and new wires . Same results.